Mitsubishi Electric FL7000U User Manual download pdf (Page 37)

EN-37

Indicators

POWER

Steady

green

Steady red

Steady

green

Steady red

Blinking

green/red

Blinking

green/red

STATUS

Blinking orange

Blinking green

Blinking green/red

Blinking red

Steady red

Off

Steady

Blinking

CONDITION

Abnormal temperature

• The ventilation grilles are clogged with dust or dirt.

• The room temperature is high.

• The ﬁlter is dirty.

The protection circuit is working or the lamp is in an

abnormal condition.

The lamp or cover isn’t closed.

Abnormal.

POSSIBLE SOLUTION

• Clean the ventilation grilles.

• Relocate the projector to a cooler place.

• Clean the ﬁlter.

• Wait until the STATUS indicator goes out,

then press the POWER button.

• If the above solution is not effective,

replace the lamp.

Replace the lamp.

Change with a new lamp if this problem

recurs.

Close the cover correctly.

Contact your dealer.

Duration when LAMP MODE of the INSTALLATION menu is set to LOW. When it is set to STANDARD, this duration will be

shorted.

When LAMP MODE is set to STANDARD, this duration will be shorted up to 2000 hours.

Lamp operation time warning. (Total lamp operation time

reached 3000 hours

while the power was on.)

Lamp operation time warning. (Total lamp operation time

reached 3000 hours

while the power was off.)

Lamp operation time warning. (Total lamp operation time

reached 4000 hours

*1*2

while the power was off.)

This projector has 2 indicators, each of which shows the operation condition of the projector.

The following offer solutions to possible problems. If these problems persist, turn the projector off and consult your

dealer.

Normal condition

Abnormal condition

STATUS indicator

POWER indicator

POWER

Steady

red

Steady

green

S TA TUS

Off

Steady

green

CONDITION

Stand-by

Lamp stand-by for power-on (about 1 minute)

The power is on. (Normal condition)

NOTE

The power cannot be turned off by pressing

the POWER button.

For the ﬁrst one minute, the power cannot be

turned on by pressing the POWER button.

Steady

green

Blinking

Lamp stand-by for power-off (about 2 minutes)

green

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 49 50

Comments to this Manuals

No comments

Mitsubishi Electric FL7000U User Manual Page 37

Comments to this Manuals

Related products and manuals for Data projectors Mitsubishi Electric FL7000U