Mitsubishi Electric FR-A5AX Instruction Manual

TRANSISTORIZED INVERTER-INSTRUCTION MANUAL-IB(NA)-66808-B (0201) MEETRANSISTORIZED INVERTERPrinted in Japan Specifications subject to change without n

5INSTALLATION2.3 WiringRoute the wires so that they do not take up a lot of space in the control circuit terminal block of the option unit.During wiri

63.12-BIT DIGITAL INPUT3.1 Wiring Examples*: Use terminals SD or PC on the inverter.(1)Relay contact signal input (2)Open collector signal input(For s

712-BIT DIGITAL INPUTREMARKS1. As the input signals are at low level, use two parallel micro signal contacts or a twin contact for relay contact input

812-BIT DIGITAL INPUT3.2 TerminalsTerminal Symbol DescriptionX0 to X11Digital signal input terminals (frequency/speed setting signal terminals)Used to

94.PARAMETERS4.1 Parameter ListThis option unit does not function if the parameter values are factory setting values. Set the followingparameter value

10PARAMETERS4.1.2 FR-V500 SeriesParameter NumberFunction nameSetting RangeFactory SettingSettingIncrements300BCD code inputBias 0 to 3600r/min 0r/min

11PARAMETERS4.2 Parameter Setting(1) Input selection [Pr.304 "Selection of digital input type and analog compensation input enable / disable.&quo

12PARAMETERS(2) Data read timing signal on-off selection (Pr.305)! How to use DY signal(3) Bias adjustment [Pr.300], [Pr.302]Bias adjustments can be m

13PARAMETERS(4) Gain adjustment [Pr.301], [Pr.303]The gain may be set in either of the following two ways:! How to set the output frequency at the inp

14PARAMETERS(5) Digital input unit selection (Pr.329) (available with the FR-V500 series only)When "9999" is set in Pr.301(BCD code input ga

A-1Thank you for choosing the Mitsubishi transistorized inverter option unit.This instruction manual gives handling information and precautions for us

15PARAMETERS(6) Digital torque command (Pr.447, Pr.448) (available with the FR-V500 series only)! When "9999" is set in Pr.304 and "4&q

16PARAMETERS4.3 Instructions(1) Acceleration/deceleration timeWhen the frequency is set with the digital input signal, the acceleration/deceleration t

17PARAMETERS2) FR-V500 seriesTerminal assignment of input signal is determined according to Pr.180 to Pr.183 and Pr.187 (input terminal function sele

185.SPECIFICATIONS5.1 Specifications!Digital input signal type . . . . . . . . . . . . 3-digit BCD code or 12-bit binary!Digital input signal selectio

REVISIONS*The manual number is given on the bottom left of the back cover.Print Date*Manual NumberRevisionSep., 1997 IB(NA)-66808-A First editionJan.,

A-22. Injury Prevention3. Additional instructionsAlso note the following points to prevent an accidental failure, injury, electric shock, etc.:(1) Tra

A-3(3) Usage(4) Maintenance, inspection and parts replacement(5) Disposal(6) General instruction!Do not modify the equipment.!When parameter clear or

CONTENTS1.PRE-OPERATION INSTRUCTIONS 11.1 Unpacking and Product Confirmation ...

11.PRE-OPERATION INSTRUCTIONS1.1 Unpacking and Product ConfirmationTake the option unit out of the package, check the unit name, and confirm that the

2PRE-OPERATION INSTRUCTIONS1.3 StructureFR-A5AXConnectorMounting holeTerminal blockscrew size M3Terminal symbolFront viewMounting holesOption fixing h

32.INSTALLATION2.1 Pre-Installation InstructionsMake sure that the input power of the inverter is off.2.2 Installation Procedure(1) Securely insert th

4INSTALLATIONCAUTION1. Only one type of option per inverter may be used. When two or more options are mounted, pri-ority is in order of slots 1, 2 and