Mitsubishi-electric WT-46805 User Manual download pdf (Page 77)

IMPORTANT

Store your Diamond Shield

carefully

so that the shield does not become

scratched.

The custom-fitted Diamond Shield is an extra protection for your television screen. It has a subtle

tint that enhances picture contrast. It can be removed or installed, according to your preference.

Wear cotton gloves to prevent putting fingerprints on the Diamond Shield.

Removal of the Diamond Shield:

• to remove put a small piece of masking tape on the outward

side of the Diamond Shield. This will designate the special

scratch resistant side for later use

• remove the retaining clips (2) with a small, flat blade screwdriver.

Press blade into opening at end of clips (Illustrations 1or 2) and

pry out

• after loosening retaining clip ends, gently pull out to remove clips

• gently pull Diamond Shield towards you, bowing the shield out of

its locking channels (Illustration 3 or 4)

• reinstall the retaining clips (2), if desired

Installation of the Diamond Shield:

• remove the retaining clips (2) with a small, flat blade screwdriver.

Press blade into opening at end of clips (Illustrations 1 or 2) and

pry out

• after loosening clip ends, gently pull out to remove clips

• Bow Diamond Shield towards you and insert into locking chan-

nels (Illustrations 3 or 4)

• press in provided retaining clips (2) into place at ends first, then

towards center

• your Diamond Shield is now installed

Appendix 1- Diamond Shield

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 87 88

No comments

Mitsubishi-electric WT-46805 User Manual Page 77