Mitsubishi Electric DX-TL2500E User Manual download pdf (Page 2)

NETWORK PC SOFTWARE DX-PC25E

The machine can notify "Alarm" or "malfunction" to up to 5 e-mail

addresses. (through SMTP server)

Alarm Notification by e-mail

The machine notifies a networked PC.

When the PC receives an alarm or malfunction from the machine, Alarm

POP-UPs appear on the PC screen.

Alarm Notification

(

Resident software

)

* Screen shot reprinted with permission

from Microsoft Corporation.

DX-TL2500E

• The monitor screen can be switched between sequential

displays including full, quad, 9 or 16 split-screen mode.

• Two multiplexer outputs are supplied with this machine.

While displaying a split screen image to OUTPUT A, another

combination split screen can be displayed to OUTPUT B.

• Live picture from all cameras can be continualy recorded while

simultaneously playing back any desired camera picture

regardless of the monitor screen display.

* Local playback can not be done during network access to this machine.

• The picture of a specified camera can be recorded without

the image being displayed on the monitor screen.

• Picture from a particular camera can be displayed and not

recorded in instances where recording of the camera picture is

legally prohibited.

BUILT-IN DUPLEX 16CH MULTIPLEXER

50 pps capture rate makes it possible that 3 pps for all 16

cameras.

* Maximum 25pps/ch

Recording rate 50pps

Built-in one large capacity HDD,

3 built-in HDDs possible

Through SCSI interface, additional HDDS can be added

externally to give up to 12TB (2TB6ID) of memory

* Not all RAID systems are checked to work with the machine.

External Memory

Individual recording interval and picture grade for each camera

both in normal and alarm recording.

Various record setting for each camera

A wired remote control provides full

operation of the machine. In addition, it

can control dome cameras with full

functions in a very compact body.

Remote Controller

Wired Remote Control

RECORDING

Up to 16 dome cameras can be

connected with the machine. Even

different manufacturers' dome cameras

can be mixed and controlled individually

using an remote controller.

Dome Camera Control

EASE OF USE

After installed, powered on and setting clock / language, the

unit can be set up auto-matically: All connected camera

numbers are detected automatically and only by selecting

recording period, (24hr, 96hr, a week, a month, so on), the unit

assigns interval and picture grade for all cameras.

Auto Set-up

Digitally signed images can be exported through SCSI and

downloaded to an external CD-R/RW, DVD-RAM, MO, DDS2/3,

HDD or ZIP.

* External drive units are limited.

Archive / Copy

High activity detection is achieved by the detection area of 192

[12(V)16(H)] dots for efficient, prolonged recording by

detecting only the pictures that needed to be recorded.

Built-in Motion detection

Alarm images are recorded in a partition area to keep alarm images.

Alarm images can not be erased automatically in repeat rec. off mode.

The partition area can be set from 10% to 90% of HDD capacity.

Alarm Partition Recording

Achieve complete data redundancy by using the Mirror

Recording option.

Mirror Recording

Wavelet compression

1ch Audio recording

Image-alteration recognition function

• The image data in the digital recorder can be down-loaded

to a CompactFlash™ card and then played back by a PC.

• The contents such as menu setups can also be recorded in

a CompactFlash™ card so the data can be exchanged.

Multiple digital recorders can then be used under the same

setup conditions, with no need to set the digital recorders from

the beginning.

CompactFlash™ slot

A three-level password (Operator, Manager, Security Manager)

can be set up to limit access to settings and controls.

Password Lock

Full screen mode

4 split screen

mode

Start of alarm

recording

No motion detection points selected

Mitsubishi's unique motion-

detection preview screen

makes it easy to select the motion

sensitivity to suit the situation.

Detection area setting screen

Each point can be set to

for on and for off

Dome Camera



9 split screen

mode

16 split screen

mode

Very flexible and easy alarm recording setting can meet the

various demands of surveillance.

• Easy setting

Both Normal and Alarm setting appears on the same screen.

• Flexible setting

3 kinds of Alarm Recording setting meet various alarm situations.

Alarm Recording

Pre-alarm recording duration can be set from 1 to 180 sec.

* Available Duration depends upon recording intervals and picture grade

Long Pre-alarm recroding up to 30 mins can be done,

when additional HDD (optional) is built-in.

Pre-alarm Recording



Alarm Channel

All recording capacity is changed to alarm recording.

Normal

Normal Recording

Up to 50pps

Alarm

Recording Only

up to 50pps

Alarm in



Alarm Plus

Alarm recording is done in addition to normal recording.



Alarm 25

Alarm recording can be done up to 25 pps by reducing normal

recording rate.

Normal

Normal Recording

Up to 50pps

Normal

Recording

Down to

25 pps

Alarm

Recording

Up to

25 pps

Total 50 pps Total 50 pps

Normal

Reserve

for

Alarm

Normal

Recording

Alarm

Recording

Normal

Recording

continues at

prealarm

rates

Alarm in

One large capacity HDD

is built-in. Additional 2

large capacity HDDs can

be added internally.

* Mitsubishi recommends

model names of HDD.

* The shaded HDDs are

optional.

OUTPUT BOUTPUT A

12 43

04-10-2003 00:42:00

DX-TL2500E

SCSI

Up to 2TB/ID

2TB/ID1

2TB/ID2

2TB/ID3

2TB/ID4

2TB/ID5

TOTAL 12TB

*Maximum 25 pps/ch

1 2

DX-TL2500E 2

Comments to this Manuals

No comments

Mitsubishi Electric DX-TL2500E User Manual Page 2

Comments to this Manuals

Related products and manuals for Recording Equipment Mitsubishi Electric DX-TL2500E