PC VIEWING/COMMUNICATION SOFTWARE OPTION FOR DIGITAL RECORDER MODEL DX-PC200 Ver.1.1 OPERATION MANUAL ―for Windows® 2000― ―for Windows® XP―
3.Three main screens The DX-PC200 has three main function screens. Switch these screens as required. Each screen enables remote monitoring of var
Depending on the current screen or operation condition, some of the buttons displayed on the screens may not be valid. These invalid buttons are di
3.1. DX-PC200 login screen Select “DX-PC200” from the start menu. When the DX-PC200 is activated, the Application Login screen will appear as sho
3.2. Main View screen When you log in the DX-PC200, the Main View screen will appear. The Main View screen shown in the following figure is in th
3.2.1 Screen selector buttons At the upper center of the Main View screen, there are three screen selector buttons. Use these buttons to go to th
3.2.3 Recorder operation buttons At the lower center of the Main View screen, there are recorder operation buttons. Use these buttons to operat
• System Log List button When you want to look through the logged data of a recorder stored in the system log list, select the recorder from the list,
3.2.5 Options button The Options button is at the lower section of the Main View screen. Use this button to display the Options p
3.2.6 Recorder list The connection status, operation status, etc. of each recorder are displayed on the recorder list. Enter a chec
3.2.7 Event list The DX-PC200 receives the IP issued events sent from the recorders to display the event list (refer to Sec 5.9). Event
End User Software License agreement Mitsubishi Electric Corporation and the third party as original development company reserve all the intellectual
3.2.8 Connect button and Disconnect button Use these buttons to connect or disconnect each recorder to the DX-PC200. The Connect/Disconnect panel
To display the newly connected recorder, refer to Sec. 5.3.4. When the Disconnect button is pressed, the DX-PC200 will select connected recorders fro
3.3. Single View screen Select one of the following methods to go to the Single View screen. • On the Main View or Multi View screen, click the S
3.3.1 Camera window Each camera image is displayed in the camera window. At the upper section of this window, there is an image information displ
3.3.2 Camera Window panel On the right side of the Camera window, click the Camera Window Panel button to display the Camera Window panel.
Decoding level adjustment bar: Use this bar to adjust the image level. To adjust the image level, the fineness of the image to be displayed will be
3.3.3 Camera list On the camera list, the statuses of the currently displayed cameras are displayed. For the camera list, there are two display mo
3.3.4 Screen layout buttons Use the grouping function to store all the screen layout data, such as the displayed camera position data and the came
3.3.5 Obtained data control area In this area, there are buttons that can control the images and sounds sent from the recorders. On the left side,
3.3.7 Full-screen button Use this button to enlarge the currently displayed camera image to the full size (same size as the screen).
Contents 1 Introduction ...
3.4. Multi View screen On the Main View or Single View screen, click the Multi View screen selector button to go to the Multi View screen. The Mu
4.Various function screens 4.1. Register/Edit Recorder panel Use this panel to register recorders in the DX-PC200 or to edit the recorder data. At
“DVR Type”: From the dropdown menu, select the model number of the recorder to be connected. If the model number of the recorder is not listed in t
recorder main bodies for the IP masquerade. “Default User”: Enter a check in this box. The extension tab will be displayed. Enter the login user ID
4.2.1 Time Search tab Use this tab to search the recorder images for the specified date and time. Using the slide bar displayed at the lower sectio
4.2.2 Alarm List Search tab Use this tab to search the alarm list for the desired alarm image of the recorder. Click the Update button to obtain the
Set the searching conditions of the alarm list. Search the next alarm list block. This is an alarm list. Click on
4.2.3 Bookmark Search tab When a regenerated recorder image is being displayed, a bookmark can be attached to the image (refer to Sec. 5.6.1). If
4.2.4 Protected Data Search tab Use this tab to obtain data from the recorder equipped with the data protective function. Click the Update butt
4.3. Recorder User Settings panel The communication function users can be registered in the recorders. For each user, various rights can be assi
4.2.3 Bookmark Search tab ...
The right to change the password using the Web screen • Control right: The right to freely operate the recorders (Example: Turning on/off the power, s
will be restricted for the master user depending on the type of the connected port. In other words, if the master user connects to the Play User port
4.4.1. Obtainment of specified file and registration of set data Click the Read button in the Recorder area to obtain the previously set menu data
【Estimated recording time】 In DX-TL5000 series recorders, you can check the estimated recording time on the recording setting screen. Enter your des
Notice If the registration operation is performed with full-size characters for the item (POP server, SMTP server, etc.) where the use of 2 byte code
Double-click this button.Use a fast-response device such as HDD as the Copy 2 device when controlling the Copy 2 device using the recorder control pan
4.6. System Log List panel Click the System Log List button on the Main View or Single View screen. The System Log List panel will be open
4.7. Options panel Click the Options button on the Main View screen. The Options panel will be opened. On the Options panel, select a
“Renew Info”: Use this area to set the interval for updating the recorder data (operation status, record area, etc.). If the Super User port of a re
4.7.2 “Live/Playback” “Number of steps in search”: Use the dropdown menu box in this area to change the base number of images for s
5.1.3. When connecting one PC and more than on recorder using an ADSL router (via the Internet): ...
4.7.3 Camera Window “Control setting”: Enter a check in the check box of each button to display the button on the right side of th
4.7.4 Scene Capture “Folder path”: Set a folder name in this box. The image data will be stored in the set folder during the
4.7.5 DB Maintenance “Event retention period“ Click the checkbox and then set how many days the data base of the event list is
4.8. Data Manager panel Click the Data Manager button at the lower section of the Main View or Single View screen. The Data Manager panel
4.8.2 Data List tab Copy data list Delete Copy Data button DVD/CD Burn button Import Data button Export Data button DataViewer b
4.8.3 Section Download panel Click the Add/Edit Download Data button at the lower section of the Schedule List screen of the data manager (refer t
Notice In the data downloaded by this function, frame loss may occur depending on the communication condition. Therefore, the section
4.8.4 DVD Burn Panel Select copy data managed in the data list tab of DataManager, and click the CD/DVD Burn button. Then, the following panel wi
Notice There are some cases where a drive cannot be used by DX-PC200, although it is a drive which can be selected in ‘SelectDrive’ and can be used by
4.9. Grouping After setting each camera image in the desired position, you can register its screen layout as “Grouping”. This Grouping registratio
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. (The o
4.9.2 Call of registered Grouping There are 3 methods to make a call of the Grouping. When a call of the Grouping is made, the dropdown section of
4.9.3 Sequential display in stored screen layout <Patrol function> With a click on the patrol/monitor button below the camera list,
4.9.4 Allocating Groupings to Grouping buttons Groupings can be allocated to the 8 numeric buttons below the camera list by users. With a click on
4.10 Various operations on Camera window 4.10.1. Facilitating visibility of the Camera window <Gaze window function> When the Camera wind
Notice The instant replay function calls recorded images from the recorder. Therefore, when the recorder has no images that were recorded the specifi
4.10.4. Starting alarm recording manually <NET alarm recording function> You can start alarm recording by clicking the button
<Information display column> The currently connected recorder name and IP address are displayed in the upper column. The currently displayed cam
4.10.6 Remote-controlling the externally connected device <MODEOUT control function> With a click on the MODEOUT control button of the C
4.10.7 Printing out with a printer With a click on the button of the Camera window, the Print window below opens. By pressing the pri
5.Operation via network In this chapter, the network function of the DX-PC200 is explained from a usage point of view. Even if you are using the DX-
1 Introduction DX-PC200 is application software to replay video data recorded by Mitsubishi’s digital recorder on Windows 2000 or Windows XP. In combi
5.1.3. When connecting one PC and more than on recorder using an ADSL router (via the Internet): IPaddress:192.168.0.200 IPaddress:192.
5.2.2. Setting the port number of the recorder For communication between the recorders and PC, it is required to set a port number. You can find
Pinging 192.168.0.100 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request time
5.3. Viewing LIVE after registering the recorder On completion of physical connection and setting of the recorder, PC, and the recorder, register t
5.3.2 Connecting network to an arbitrary recorder In order to connect to an arbitrary recorder, select a desired recorder from the recorder list (
5.3.3 Changing display to the SingleView (MultiView) screen With a click on the selector button of the SingleView screen of the MainView screen, g
5.3.5 Changing the displayed camera In order to change the camera image displayed in an individual Camera window, drag a desired camera from the
When the recorder’s communication operation is unstable or the network band is insecure, reduce the refresh speed. When a PC to be used does not have
5.5. What you can do during the live monitoring operation The following functions can make live monitoring more effective when used during the live
Notice When band control is being applied to the recorder, ample communication band is not secured, or internal processing with heavy load (such as r
used.) • NIC that operates correctly under the condition satisfying the above-mentioned requirements (Necessary when the network function is used.) N
5.6. Searching for a desired image from the image data stored in a recorder Vast amounts of image data are recorded in the recorder. Use the fo
5.7. Storing images obtained from a recorder in a PC and printing <How to store> With a click on the Scene Capture button adjacent
5.8. Taking out image data outside There are 2 methods available to take out the images recorded in a recorder and carry them outside. 1. Store the
5.9. Receiving IP AlarmNotify of the recorder With the DX-PC200, you can be notified of occurrences of events on the PC by utilizing IP AlarmNotify
The DataManager screen is displayed and at the same time residing in the task tray starts. Even if the DataManager screen is closed with the x butto
5.9.3 Receiving IP AlarmNotify When an event worthy of notification occurs on the recorder and IP AlarmNotify is sent to the PC installed with the D
5.9.4 Confirming the recorder image at the time of AlarmNotify event With a double-click on the item line of the event list, you can call the recor
When “Exit” is selected, the resident module exits and the programmed time synchronization is not performed any longer. When the following login
selected by default. To use the time synchronization function, make sure to login under the user name having the authority for this function. (No
Notice Clock adjustment cannot be carried out successfully when the login user has no authority to change the setting or when the authority to change
2 Setup 2.1 Setup (Installation) To install this software, start the Setup Launch.exe file contained in the DX-PC200 folder of this CD. Follow the
6. Playing back the copy data The DX-PC200 can play back, by using the designated viewer, data which are directly copied to a copy media such as a DVD
6.2 Playing back copy dataSelecting, from the list, the copy data which you want to play back with the data list tab of DataManager, click the Data Pl
<Camera Window button> Bu Copy··················The image being displayed is captured to the clipboard. saved in BMP format. -
Notplayback or high-speed reverse displayed. In such a case, carry out normal playback or frame-by-frame playback to mages at the end of loaded data.
7. Appendix Restrictions • Functions supported by this software depend on the type of your Mitsubishi digital reco7.1 • rder. • If an opera
refr sh speed slider on the • • If he network function s e camera window panel. t i used while images are being searched on the digital recorder’s
Comments to this Manuals