Mitsubishi-electric HS-U748 User Manual download pdf (Page 35)

1 Connect the audio cable to AUDIO OUT L

and R on the playback VCR and to AUDIO

IN L and R on the HS-U748. If the playback

VCR is mono, use only the AUDIO IN L on

the HS-U748.

2 If the playback VCR is S-VHS, connect an

S-video cable to S-VIDEO OUT on the

playback VCR and to the S-VIDEO IN on

the HS-U748 rear panel.

If the playback VCR is standard VHS,

connect a video cable to VIDEO OUT on the

playback VCR and to the VIDEO IN on the

HS-U748.

3 If the playback VCR is Hi-Fi, set the audio

monitor to Stereo.

4 Use INPUT to set the HS-U748 to External

L1 if you used the HS-U748 rear panel jacks,

or External L2 if you used the HS-U748

front panel jacks.

Using Two VCRs to Copy

There are two basic ways to make a copy of a tape.

One way is to use the HS-U748 to record and another VCR for playback.

The other way is to use another VCR to record and use the HS-U748 for playback.

Regardless of which method you may choose, you will need one RCA audio cable and one S-video cable

to connect the two VCRs. You can use either a standard RCA video cable or an S-video cable. If you do

not have these cables, they are available at your local electronics dealer. The highest quality is achieved

through an S-video cable.

AUDIO

VIDEO

L/MONO

S-VIDEO

PLAYBACK

RECORDING

AUDIO IN 1 L/MONO

AUDIO IN 1 R

S-VIDEO IN 1

AUDIO OUT R

S-VIDEO OUT

AUDIO OUT L

VIDEO OUT

VIDEO IN 1

HS-U748

Using the HS-U748 to record from another VCR

Editing Features

5 Put a blank tape into the HS-U748. If you are

recording in S-VHS, be sure to use an S-VHS

tape.

Make sure that the S-VHS Auto record or

S-ET record in the S-VHS Set-Up menu is

set correctly. See page 21, Selecting

Recording format.

If you connect playback VCR to the HS-U748

rear panel, make sure that the Rear S-input

in the S-VHS Set-Up menu is set correctly.

See page 22, Selecting S-input Setting.

6 Put the tape you want to copy into the

playback VCR and find the cue point. Press

STOP if the picture starts playing.

7 On the HS-U748, press REC, then PAUSE.

8 On the playback VCR, press PLAY, then

PAUSE.

9 Press the PAUSE buttons on both VCRs at

the same time to begin copying the tape.

10 When finished, press STOP on both VCRs.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 59 60

Comments to this Manuals

No comments

Mitsubishi-electric HS-U748 User Manual Page 35

Comments to this Manuals

Related products and manuals for Video recorders Mitsubishi-electric HS-U748