Mitsubishi Electric MDT552S Specifications download pdf (Page 50)

English-49

English



GAMMA SELECTION

You can select the gamma mode from NATIVE, S GAMMA,

2.2, 2.4, OPTION, and PROGRAMMABLE.

PROGRAMMABLE can change the GAMMA characteristic

curve via a computer.

Contact your dealer for further details.

NOTE: GAMMA is ﬁ xed to 2.2 in the sRGB picture mode.

When PROGRAMMABLE has been selected, the

setting for color temperature is ﬁ xed at 10,000 K

(NATIVE).



SUPER RESOLUTION

NOTE: This adjustment doesn’t work in the sRGB picture

mode.

[SUPER RESOLUTION]

Still photos, natural images and videos may beneﬁ t with

enhanced resolution by adjusting this setting.

You can adjust the effect at 10 levels using the adjustment

bar (0 to 100) in 10 steps.

[RESOLUTION DETECT]

This function applies optimum effect to the input images

depending on their resolution.

You can set this item when the super resolution level is

other than 0% (off).

AUTO: The resolution of the input image is automatically

recognized and the effect suitable for the

recognized resolution is applied.

HD: The effect suitable for high resolution images is

applied.

SD: The effect suitable for standard resolution images

is applied.

LD: The effect suitable for low resolution images such

as video stream content is applied.

NOTE: The effect of the super resolution technique varies

depending on the type and resolution of the input

image. Noise or ﬂ icker may occur depending on the

displayed content.



AUTO BRIGHTNESS

This function controls the screen brightness depending on

the ambient light for easy viewing.

In addition, it changes the screen brightness depending on

the ambient light and what are displayed on the screen to

reduce power consumption as low as possible.

NOTE: This adjustment doesn’t work in the sRGB or

CINEMA picture mode.

[AUTO BRIGHTNESS]

AUTO: The settings of AUTO BRIGHTNESS are

adjusted automatically.

NOTE: When you select AUTO, you cannot

adjust any other items than [CONTROL]

individually.

LOCAL: The AUTO BRIGHTNESS function is

enabled and you can adjust [CONTROL] and

subsequent items individually.

REMOTE: The AUTO BRIGHTNESS function is

enabled. In addition, the monitor enters the

intercommunication mode where multiple

monitors are controlled collectively. (See page

60.)

OFF: This function is disabled.

OSD screen functions (continued)

[CONTROL]

PRIMARY: Select this setting to conﬁ gure the monitor

as Master when controlling multiple

monitors collectively.

SECONDARY: Select this setting to use the monitor

alone or to conﬁ gure the monitor as

Slave when controlling multiple monitors

collectively.

[LIGHT FROM BACK]

This function is enabled only when [REAR SENSOR] is ON.

When a light source such as a light and a window is behind

the monitor, the rear sensor takes precedence.

YES: Select this setting when there is a light source

such lighting equipment and a window behind the

monitor.

NO: Select this setting when there is no light source

such lighting equipment and a window behind the

monitor.

[BACK WALL]

This function is enabled only when [REAR SENSOR] is ON.

Select the following settings according to the distance

between the rear of the monitor and the wall or window.

FAR: The distance is 5 meters or longer.

NEAR: The distance is 5 meters or shorter.

[FRONT SENSOR]

Select ON for normal use.

OFF: Select this setting when the sensor on the front

panel is shielded.

[REAR SENSOR]

Select ON for normal use.

OFF: Select this setting when the sensor on the rear

panel is shielded.

[SATURATION]

ON: The image saturation is adjusted depending on the

ambient light.

OFF: Image saturation isn’t adjusted.

[VIDEO DETECT]

ON: The screen brightness varies depending on what

are displayed on the screen to reduce power

consumption of the monitor.

OFF: The screen brightness doesn’t vary and the power

consumption isn’t reduced.



PICTURE RESET

You can reset all the PICTURE settings to the factory

defaults.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 68 69

Comments to this Manuals

No comments

Mitsubishi Electric MDT552S Specifications Page 50

Comments to this Manuals

Related products and manuals for Public displays Mitsubishi Electric MDT552S