Mitsubishi Electric PUHZ-SW50VHA Service Manual download pdf (Page 59)

OPERATING PROCEDURE PHOTOS

Photo 13

Photo 14

Compressor

(MC)

Valve bed

Separator

fixing screw

Compressor

fixing nut

Power receiver

Outlet

Inlet

12. Removing the compressor (MC)

(1) Remove the service panel. (See Photo 2)

(2) Remove the top panel. (See Photo 1)

(3) Remove the front panel. (See Photo 1)

(4) Remove the back panel. (See Photo 1)

(5) Remove the electrical parts box. (See Photo 5)

(6) Remove the thermistor <Discharge> (TH4) and thermistor

<Comp. surface> (TH34). (See Photo 13)

(7) Remove 3 separator fixing screws (4 × 10) and remove the

separator.

(8) Recover refrigerant.

(9) Remove 3 compressor fixing nuts by using a spanner or an

adjustable wrench.

(10) Remove the welded pipe of motor for compressor inlet

and outlet.

Note: Recover refrigerant without spreading it in the air.

Receiver leg

fixing screw

Receiver leg

13. Removing the power receiver

(1) Remove the service panel. (See Photo 2)

(2) Remove the top panel. (See Photo 1)

(3) Remove the front panel. (See Photo 1)

(4) Remove the back panel. (See Photo 1)

(5) Remove the electrical parts box. (See Photo 5)

(6) Recover refrigerant.

(7) Remove 4 welded pipes of power receiver inlet and outlet.

(8) Remove 2 receiver leg fixing screws (4 × 10).

(9) Remove the power receiver together with the receiver leg.

Note: Recover refrigerant without spreading it in the air.

Thermistor

<Comp.surface> (TH34)

Thermistor<Discharge>

(TH4)

OCH525

1 2 ... 54 55 56 57 58 59 60

Comments to this Manuals

No comments

Mitsubishi Electric PUHZ-SW50VHA Service Manual Page 59

Comments to this Manuals

Related products and manuals for Split-system air conditioners Mitsubishi Electric PUHZ-SW50VHA