Mitsubishi Electric MJ-E26VX-A1 Instruction Manual download pdf (Page 21)

Operating

Removing Water from the Tank

The unit automatically shuts down and lights the Tank full lamp when the tank (approximately 5L) is full.

Empty the tank.

1 Remove the water tank.

Hold the tank this way

2 Remove the tank lid, and empty.

Note

Grasp handle and

slide out.

Do not remove or dismantle the floating element in

the tank. If it is removed, the unit cannot detect

when the tank is full, and this could result in

leakage.

Pour the water

out as shown.

Tank lid

Floating element

Do not remove or dismantle the float.

Tank guard

3 Reattach the tank lid and replace

the water tank.

Check the lid and guard are secure. Slide

the tank in with both hands (you should

hear a beep.)

¡ Secure the lid and guard properly or

else the tank may become stuck.

¡ If the tank is not installed correctly, the

tank full light will come on, and the unit

will not operate.

e_mj_e26vx_a1(20_28)_e33.qx 05/10/13 5:23 PM Page 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Mitsubishi Electric MJ-E26VX-A1 Instruction Manual Page 21