Mitsubishi Electric MJ-E26VX-A1 Instruction Manual download pdf (Page 25)

After switching the unit off, leave for one day until

any water inside has had time to settle. Then carry

out the following steps.

1 Perform drying inside

Performing internal drying to prevent mildew

growth is recommended.

2 Hang on the

cord hook.

3 Remove the

drainage

water.

Empty the water tank and

wipe away any remaining

drops of water.

Clean the

pre-filter.

Remove grit with

vacuum cleaner

5 Store the unit.

• When you are sure that all parts of the

unit are dry, cover it with a cloth to keep

it from dust.

• Store the unit in an upright position in a

place not exposed to direct sunlight.

Remove the pre-filter and replace the

photocatalytic filter.

For maintenance procedures see

Troubleshooting

Replacement

Parts

The photocatalytic filter becomes depleted over

time.

Replace them when necessary.

Storage and

Disposal

Storage

Photocatalytic filter for replacement

∞ Type: MJPR-18TXFT

∞ Type code: 5C5 816

For these items contact your nearest Mitsubishi

Electric dealer.

Parts sold separately

Replacing the photocatalytic filter

Although the photocatalytic filter lasts roughly 2

years, replace it when:

¡ You have soaked the filter 8 times.

¡ The photocatalytic filter has turned brown due

to cigarette smoke or black with dust.

Filter life differs on usage and environmental

conditions.

When disposing the unit

Dispose according to the garbage regulations in

your district.

¡ Photocatalytic filter

Material: PET and PS

¡ Unit

Do not disassemble. Dispose according to the

garbage regulations in your district.

e_mj_e26vx_a1(20_28)_e33.qx 05/11/2 4:20 PM Page 25

1 2 ... 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Mitsubishi Electric MJ-E26VX-A1 Instruction Manual Page 25

Comments to this Manuals

Related products and manuals for Dehumidifiers Mitsubishi Electric MJ-E26VX-A1