Mitsubishi Digital Recorder - How to Guide
Page 2
Advanced Searching
Note: While you are in the SEARCH mode the DVR will continue to record.
The recorder will beep to let you know you’ve completed each task successfully.
Step 1. To enter the SEARCH mode.
Open the front panel, and to the right of the middle you
will see a group of 9 buttons.
To search for a recorded time
period – press the [ SEARCH ] button.
If TIME DATE SEARCH appears on screen, move to Step 2.
Else depending on the last type of search method used, various search menus may appear.
Press [ SEARCH ] a second time to enter the SEARCH SELECTION menu.
Using the [ JOG DIAL ], select SEARCH TYPE, and then turn the [ SHUTTLE RING ] clockwise. The
SEARCH TYPE will flash.
Using the [ JOG DIAL ], select TIME DATE, and then turn the [ SHUTTLE RING
] clockwise. Now turn the [ SHUTTLE RING ] anticlockwise, to go back to the
TIME DATE SEARCH menu. Now move to Step 2.
Step 2. The TIME DATE SEARCH menu will now appear on your display monitor.
You will notice [ >> ] next to the start of the Date and Time.
The [ >> ] arrows represent what line of the menu you are about to
edit. At the moment this will be the Date / Time that you wish to find.
Below this there is:
[ START ] - this is the start point of all recorded time.
[ END ] - this is the end point of all recorded time.
Note that you can only search between the START and
END Date / Times shown.
Step 3. To SEARCH you now need to enter a Date / Time.
Do this by turning the [ SHUTTLE RING ] clockwise (to the right) once.
~ Now the DAY will be highlighted.
To edit the DAY turn the [ SHUTTLE RING ] clockwise (to the right) once again.
~ Now the DAY will be flashing.
To change the value of the DAY turn the [ JOG DIAL ] clockwise (to the right) to
increase the day or anticlockwise (to the left) to decrease the day.
Once you have selected the correct DAY that you wish to search, turn
the [ SHUTTLE RING ] clockwise once again, and the flashing will stop and the day
will be highlighted once again.
~ You have now selected the DAY that you want to search in.
Step 4. Next you will need to select the MONTH. At present the DAY is highlighted.
To select the MONTH you need to turn the [ JOG DIAL ] clockwise (to the right) once.
~ Now the MONTH will now be highlighted.
To edit the MONTH turn the [ SHUTTLE RING ] clockwise (to the right) once again.
~ Now the MONTH will be flashing.
To change the value of the MONTH turn the [ JOG DIAL ] clockwise (to the right) to increase the month
or anticlockwise (to the left) to decrease the month.
Once you have selected the correct MONTH that you wish to search in, turn the [ SHUTTLE RING ]
clockwise once again, and the flashing will stop and will be highlighted once again.
SEARCH
(139 pages)
(31 pages)
(108 pages)
(31 pages)
(164 pages)
(172 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals