Mitsubishi Electric PLA-ZRP35 Service Manual download pdf (Page 9)

Setting and display items Setting details

Vane · Louver · Vent.

(Lossnay)

Use to set the vane angle.

• Select a desired vane setting from f ve different settings.

Use to turn ON / OFF the louver.

• Select a desired setting from "ON" and "OFF."

Use to set the amount of ventilation.

• Select a desired setting from "Off," "Low," and "High."

High power Use to reach the comfortable room temperature quickly.

• Units can be operated in the High-power mode for up to 30 minutes.

Timer On/Off timer Use to set the operation On/Off times.

• Time can be set in 5-minute increments.

* Clock setting is required.

Auto-Off

timer

Use to set the Auto-Off time.

• Time can be set to a value from 30 to 240 in 10-minute increments.

Filter information Use to check the f lter status.

• The f lter sign can be reset.

Error information Use to check error information when an error occurs.

• Error code, error source, refrigerant address, unit model, manufacturing number, contact

information (dealer's phone number) can be displayed.

* The unit model, manufacturing number, and contact information need to be registered in

advance to be displayed.

Weekly timer Use to set the weekly operation On / Off times.

• Up to eight operation patterns can be set for each day.

* Clock setting is required.

* Not valid when the On/Off timer is enabled.

Energy

saving

Auto return Use to get the units to operate at the preset temperature after performing energy-save

operation for a specif ed time period.

• Time can be set to a value from 30 and 120 in 10-minute increments.

* This function will not be valid when the preset temperature ranges are restricted.

Schedule Set the start/stop times to operate the units in the energy-save mode for each day of the

week, and set the energy-saving rate.

• Up to four energy-save operation patterns can be set for each day.

• Time can be set in 5-minute increments.

• Energy-saving rate can be set to a value from 0% or 50 to 90% in 10% increments.

* Clock setting is required.

Night setback Use to make Night setback settings.

• Select "Yes" to enable the setting, and "No" to disable the setting. The temperature range and

the start/stop times can be set.

* Clock setting is required.

Restriction Temp. range Use to restrict the preset temperature range.

• Different temperature ranges can be set for different operation modes.

Operation

lock

Use to lock selected functions.

• The locked functions cannot be operated.

Maintenance

Auto

descending

panel

Auto descending panel (Optional parts) Up / Down you can do.

Manual

vane angle

Use to set the vane angle for each vane to a f xed position.

Initial setting

Main/Sub

When connecting two remote controllers, one of them needs to be designated as a sub

controller.

Clock

Use to set the current time.

Main display

Use to switch between "Full" and "Basic" modes for the Main display.

• The default setting is "Full."

Contrast

Use to adjust screen contrast.

Main menu list

OCH535

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Comments to this Manuals

No comments

Mitsubishi Electric PLA-ZRP35 Service Manual Page 9

Comments to this Manuals

Related products and manuals for Split-system air conditioners Mitsubishi Electric PLA-ZRP35