Mitsubishi Electric Eclipse User Manual download pdf (Page 56)

2. Check the "Module monitoring" window.

No. Name Description

1) Slot No. Specify a slot No. to be monitored.

2) Start I/O No. Displays the start I/O No. of the module mounted on the slot specified in 1).

3) Control CPU

Displays the CPU No. that controls the module mounted on the slot specified in 1).

When C Controller setting utility is connected to the C Controller module that serves as

a control CPU, "*" appears on the right of the CPU No.

4) Type

Displays the number of I/O points and the type of a module when a module other than

a CPU module is mounted on the slot specified in 1).

button,

button

Starts or stops monitoring of the C Controller module.

"*" flashes in the upper right of this button during monitoring.

button

Displays the "System information" window.

7) Input

Monitors the input (X) of the module mounted on the slot specified in 1).

0: OFF 1: ON

8) Output

Monitors the output (Y) of the module mounted on the slot specified in 1).

0: OFF 1: ON

9) Buffer memory

Monitors a buffer memory when an intelligent function module is mounted on the slot

specified in 1).

10) Address format Select a numeric format for "Offset".

11) Offset Specify the address of a buffer memory area to be monitored.

12) Latest error Displays the error code of the latest error occurred in an intelligent function module.

13) Numeric format Select a numeric format for a buffer memory or a CPU shared memory.

14) Display format Select a display format for a buffer memory or a CPU shared memory.

12)

13)

14)

1) 2) 3) 4)

10) 11)

7) 8) 9)

1 2 ... 51 52 53 54 55 56 57 58 59 60

No comments

Mitsubishi Electric Eclipse User Manual Page 56