Mitsubishi Electric MDT701S Specifications Page 22
- Page / 68
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
English-21
English
DVI-D IN
HDMI1 IN or HDMI2 IN
DP IN
AUDIO ANALOG IN
HDMI cable
DisplayPort cable
DVI-D cable
DVI-D cable
To DVI-D output
To HDMI output
To DP output
To audio output
Audio cable
(ø3.5-mm stereo mini)
DVI-D IN
DVI-D OUT
Audio cable
(ø3.5-mm stereo mini)
AUDIO ANALOG OUT
AUDIO ANALOG IN
Personal computer
(DVI-D, HDMI)
Connecting with a computer (digital connection)
Digital connection:
• Connection via the HDMI IN connector
(1) Connect an HDMI cable (commercially available) to the HDMI1 IN or HDMI2 IN connector.
(2) Select [HDMI1] or [HDMI2] according to the connected connector by pressing the INPUT button on the monitor or the HDMI1
or HDMI2 button on the wireless remote control.
• Connection via the DVI-D IN connector
(1) Connect a DVI-D cable (commercially available) to the DVI-D IN connector.
(2) Select [DVI-D] using the INPUT button on the monitor or the DVI-D button on the wireless remote control.
• Connection via the DISPLAYPORT IN connector
(1) Connect a DisplayPort cable (commercially available) to the DISPLAYPORT IN connector.
(2) Select [DISPLAYPORT] using the INPUT button on the monitor or the DISPLAYPORT button on the wireless remote control.
Second monitor connection:
• Connect the DVI-D OUT connector on the fi rst monitor and the DVI-D IN connector on the second monitor using a DVI-D cable
(commercially available).
NOTE:
• In the daisy chain connection, you can connect up to 4 monitors (when using 2-meter cables). However, the maximum number
of connectable monitors may be limited. It is recommended to check the number of connectable monitors in advance in your
installation environment.
• Set RGB of POWER SAVE in the CONFIGURATION1 menu to OFF when using DVI-D in the daisy chain mode.
Audio connection:
• Connect an audio cable (ø3.5-mm stereo mini) (commercially available) to the AUDIO ANALOG IN connector.
When connecting an HDMI cable, select [HDMI1] or [HDMI2] according to the connected connector by pressing the INPUT
button on the monitor or the HDMI1 or HDMI2 button on the wireless remote control. Note that you can select HDMI1, HDMI2, or
ANALOG audio at this time. (You can select HDMI audio only when the video input is [HDMI1] or [HDMI2]. The audio of only the
selected input is output and HDMI is displayed.)
When connecting a DVI-D cable, select [DVI-D] using the INPUT button on the monitor or the DVI-D button on the wireless
remote control. At the moment of the selection, the audio is automatically switched to [ANALOG].
When connecting a DisplayPort cable, select [DISPLAYPORT] using the INPUT button on the monitor or the DISPLAYPORT
button on the wireless remote control. Note that you can select DISPLAYPORT or ANALOG audio at this time.
• To output the audio to the second monitor, connect the AUDIO ANALOG OUT connector on the fi rst monitor and the AUDIO
ANALOG IN connector on the second monitor using an audio cable (ø3.5-mm stereo mini) (commercially available).
Even when HDMI or DISPLAYPORT is selected on the fi rst monitor, the selected audio is output from the AUDIO ANALOG OUT
connector.
NOTE:
• For switching the audio input when an HDMI cable or a DisplayPort cable is connected, see “Audio input change.”
P-4 Connection procedure (continued)
LCD monitor (second monitor)
LCD monitor (fi rst monitor)
LCD monitor
(fi rst monitor)
LCD monitor
(second monitor)
- LCD Display Monitor 1
- English-1 2
- Features 3
- Important Information 4
- English-4 5
- Declaration 6
- English-6 7
- Contents 8
- Parts Name and Functions 9
- English-9 10
- Wireless Remote Control 11
- English-11 12
- Preparation for use 13
- English-13 14
- Carry out as necessary 15
- P-4 Connection procedure 19
- English-19 20
- English-20 21
- English-21 22
- English-22 23
- English-23 24
- P-6 Connecting RS-232C 27
- P-7 Connecting LAN 28
- Connecting the power source 30
- How to Use 31
- Turning on external devices 32
- Turning on the monitor 32
- Power Management Function 33
- English-33 34
- English-34 35
- U-5 Auto-setup 36
- U-7 Screen adjustment 37
- U-9 Speaker setting 38
- U-8 Picture adjustment 38
- U-11 Schedule setting 40
- How to set up schedule 41
- U-12 Remote control 42
- LAN Remote control 44
- U-13 Setting the USB hub 45
- Confi guration of OSD screen 46
- Basic operation of OSD 47
- OSD screen functions 48
- English-48 49
- GAMMA SELECTION 49
- SUPER RESOLUTION 49
- AUTO BRIGHTNESS 49
- PICTURE RESET 49
- Enlarged 53
- English-57 58
- CLOSED CAPTION 58
- USB UPSTREAM 58
- ADVANCED OPTION RESET 58
- Other functions 59
- Other functions (continued) 60
- Troubleshooting 64
- Specifi cations 65
- Pin Assignment 66
- Pin Assignment (continued) 67
- AW-P1336A 68
- Printed in China 68
Related products and manuals for Public displays Mitsubishi Electric MDT701S
(48 pages)© 2020, manymanuals.com. All rights reserved. | 0.587 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals