Mitsubishi Electric MDT701S Specifications download pdf (Page 9)

English-8

POWER button ( )

Switches the power on/off.

This button doesn’t work when the power indicator is off. Turn

on the main power. (See page 31.)

MUTE button

Switches the audio mute on/off.

INPUT button

Displays the OSD menu to switch the video input.

You can select [HDMI1], [HDMI2], [DVI-D], [D-SUB], [OPTION]*,

[DISPLAYPORT], [YPbPr], [S-VIDEO], or [VIDEO] using the UP

(

) or DOWN ( ) button.

* OPTION can be used when an expansion module is

mounted on the option slot.

PLUS (+) button

Acts as (+) button to increase the adjustment in the OSD menu.

Increases the audio output level when the OSD menu is off.

MINUS (-) button

Acts as (-) button to decrease the adjustment in the OSD menu.

Decreases the audio output level when the OSD menu is off.

UP ( ) button

Acts as button to move the highlighted area up to select an

adjustment item in the OSD menu.

DOWN ( ) button

Acts as button to move the highlighted area down to select

an adjustment item in the OSD menu.

EXIT button

Activates the OSD menu when the OSD menu is off.

Acts as EXIT button to go back to the previous OSD menu.

Speakers

Audio sound is output from the built-in speakers.

Brightness sensor (on the front and rear)

Sensor for the auto brightness function.

(Reference) Control Lock mode

You can lock the operation buttons. See page 58.

Main Power Switch

Switches the main power on/off.

NOTE:

Within 2 seconds after turning off the power by the POWER

button on the wireless remote control or the monitor or by a

communication command, don’t turn off the main power switch,

don’t disconnect the power cord, and don’t turn off the breaker.

If the AC power is turned off immediately after the power-off

operation, all the OSD settings including the language selection

may be reset to the factory defaults at the next power-on.

If the OSD settings are reset to the factory defaults as

described above, reconﬁ gure the OSD settings using the

following procedure.

1. Turn off the power of the monitor using the wireless remote

control or otherwise.

2. Wait for at least 2 seconds.

3. Turn on the power of the monitor using the wireless remote

control or otherwise.

4. Check and reconﬁ gure the OSD settings.

Remote control sensor and Power indicator

Remote control sensor: Receives the signal from the wireless

remote control.

Power indicator: Indicates the state of the LCD monitor.

• Steady green: The power is on.

• Steady red: The power is off.

Some operations such as power-on

are possible.

• Steady green and red: The LCD monitor is in the sleep

mode.

• Off: The main power is off.

• Steady red and blinking green: The LCD monitor is in the

schedule standby mode.

• Blinking red: The LCD monitor has an error

(detected by the self-diagnostic

function).

Buttons, Switch, and Indicator

OFF

Parts Name and Functions

NOTE:

For details about the OSD menu operation using the buttons, see “Basic operation of OSD.” (See page 46.)

Front

Control buttons

Rear

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 67 68

Comments to this Manuals

No comments

Mitsubishi Electric MDT701S Specifications Page 9

Comments to this Manuals

Related products and manuals for Public displays Mitsubishi Electric MDT701S