Mitsubishi Electric MDT701S Specifications Page 24
- Page / 68
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
English-23
English
BNC cable
S-VIDEO IN
AUDIO
ANALOG IN
AUDIO
ANALOG OUT
VIDEO IN
VIDEO IN
VIDEO OUT
To S video output
To video output
To audio output
To audio input
Audio cable
(ø3.5-mm stereo mini – RCA)
Audio cable (ø3.5-mm stereo mini – RCA)
BNC cable
S video cable
Connecting a video device (composite video/S video device)/stereo amplifi er
This monitor can be connected to a composite video or S video device or a stereo amplifi er.
Refer to the user’s manual of the composite video or S video device or the stereo amplifi er for details. (Cables shown in the fi gure
below are commercially available.)
• To connect a video device to the VIDEO IN connector (VIDEO IN or S-VIDEO IN) on the monitor, use a BNC cable or an S video
cable. For connection to the audio input connector on the monitor, use an audio cable (ø3.5-mm stereo mini – RCA). Connect the
connectors of the audio cable (RCA) correctly. For connection to the VIDEO IN connector, select [VIDEO] using the INPUT button
on the monitor or the VIDEO button on the wireless remote control. For connection to the S-VIDEO IN connector, select [S-VIDEO]
using the INPUT button on the monitor or the S-VIDEO button on the wireless remote control.
• To connect two monitors, connect one end of a BNC cable to the VIDEO OUT connector of the fi rst monitor and the other end to
the VIDEO IN connector of the second monitor.
NOTE:
• In the daisy chain connection, you can connect up to 5 monitors (when using 5-meter cables). However, the maximum number of
connectable monitors may be limited depending on the connected devices to be used. It is recommended to check the number
of connectable monitors in advance in your installation environment.
• When an analog signal is transmitted through the daisy chain, the picture quality such as brightness and sharpness degrades at
the latter devices in the daisy chain connection.
• When different monitors need to be adjusted so that their tint can be identical, such as when using multiple screens, it is
recommended to use a signal distributor (commercially available).
• When connecting a stereo amplifi er to the monitor, be sure to turn off the power of the stereo amplifi er. For connection to the
AUDIO ANALOG OUT connector on the monitor, use an audio cable (ø3.5-mm stereo mini – RCA). Connect the connectors of
the audio cable (RCA) correctly. Be sure to turn on the monitor fi rst, and then turn on the stereo amplifi er.
• The selected audio input signal is output from the AUDIO ANALOG OUT connector.
LCD monitor (second monitor)
LCD monitor (fi rst monitor)
Stereo amplifi er
External speakers
Video device
(composite video/S video device)
P-4 Connection procedure (continued)
- LCD Display Monitor 1
- English-1 2
- Features 3
- Important Information 4
- English-4 5
- Declaration 6
- English-6 7
- Contents 8
- Parts Name and Functions 9
- English-9 10
- Wireless Remote Control 11
- English-11 12
- Preparation for use 13
- English-13 14
- Carry out as necessary 15
- P-4 Connection procedure 19
- English-19 20
- English-20 21
- English-21 22
- English-22 23
- English-23 24
- P-6 Connecting RS-232C 27
- P-7 Connecting LAN 28
- Connecting the power source 30
- How to Use 31
- Turning on external devices 32
- Turning on the monitor 32
- Power Management Function 33
- English-33 34
- English-34 35
- U-5 Auto-setup 36
- U-7 Screen adjustment 37
- U-9 Speaker setting 38
- U-8 Picture adjustment 38
- U-11 Schedule setting 40
- How to set up schedule 41
- U-12 Remote control 42
- LAN Remote control 44
- U-13 Setting the USB hub 45
- Confi guration of OSD screen 46
- Basic operation of OSD 47
- OSD screen functions 48
- English-48 49
- GAMMA SELECTION 49
- SUPER RESOLUTION 49
- AUTO BRIGHTNESS 49
- PICTURE RESET 49
- Enlarged 53
- English-57 58
- CLOSED CAPTION 58
- USB UPSTREAM 58
- ADVANCED OPTION RESET 58
- Other functions 59
- Other functions (continued) 60
- Troubleshooting 64
- Specifi cations 65
- Pin Assignment 66
- Pin Assignment (continued) 67
- AW-P1336A 68
- Printed in China 68
Related products and manuals for Public displays Mitsubishi Electric MDT701S
(48 pages)© 2020, manymanuals.com. All rights reserved. | 2.288 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals