
Applicable Systems System Configuration
HART Analog Output Module ME1DA6HAI-Q 2 – 3
Supported software packages
Relation between the system containing the ME1DA6HAI-Q and the software package is shown in the
following table.
CPU of the PLC in which the ME1DA6HAI-Q is installed
Software Version
GX Developer
GX IEC Developer
Q00J/Q00/Q01CPU
Single CPU system Version 7 or later
Version 4 or later
Multiple CPU system Version 8 or later
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Single CPU system Version 4 or later
Multiple CPU system Version 6 or later
Q02PH/Q06PHCPU
Single CPU system
Version 8.68W or later Version 7.03 or later
Multiple CPU system
Q12PH/Q25PHCPU
Single CPU system
Version 7.10L or later Version 4 or later
Multiple CPU system
Q12PRH/Q25PRHCPU Redundant CPU system Version 8.45X or later Version 4 or later
Q00UJ/ Q00U/ Q01UCPU
Single CPU system
Version 8.76E or later Version 7.04 or later
Multiple CPU system
Q02U/Q03UD/Q04UDH/
Q06UDHCPU
Single CPU system
Version 8.48A or later Version 7.03 or later
Multiple CPU system
Q10UDH/Q20UDHCPU
Single CPU system
Version 8.76E or later Version 7.04 or later
Multiple CPU system
Q13UDH/Q26UDHCPU
Single CPU system
Version 8.62Q or later Version 7.03 or later
Multiple CPU system
Q03UDE/Q04UDEH/
Q06UDEH/Q13UDEH/
Q26UDEHCPU
Single CPU system
Version 8.68W or later Version 7.03 or later
Multiple CPU system
Q10UDEH/Q20UDEHCPU
Single CPU system
Version 8.76E or later Version 7.04 or later
Multiple CPU system
If installed in a MELSECNET/H remote I/O station Version 6 or later Version 4 or later
Tab. 2-3: Required software versions
Comments to this Manuals