Mitsubishi Electric DX-TL2500E Instruction Manual download pdf (Page 23)

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Basic Operations

ENGLISH

■ Basic manual recording

Normal recording using manual operation is explained here.

Before starting recording, recording settings must be

checked. After checking the settings of “HDD REPEAT REC

MAIN”, “HDD REPEAT REC SUB” and “HDD REPEAT REC

LPA” in the <HDD SETTINGS> screen ( see page 49),

the REC mode settings are made.

Settings here are for normal recording only. For

timer recording, settings must be made on the

<TIMER PROGRAM SETTINGS> screen (

see

page 46).

♦ Setting the recording interval and recording

picture quality for normal recording

To perform normal recording, “PPS” and “GRADE” must

be set for each camera.

Setting of “PPS” ( default : “1.563P” )

“3.125P”, “

1.563P”, “1.042P”, “0.781P”, “0.625P”,

“0.521P”, “0.391P”, “0.313P”, “0.125P”, “0.063P”,

“0.031P”, “0.016P”, “- - - - - -”

“- - - - - -” : Recording cannot be performed with

camera set to this item.

Available recording intervals will vary according

to the number of cameras operating or ALARM RE-

CORDING settings (

see page 43). Interval dis-

plays will be according to the chart.

Setting of “GRADE” ( default : “STD” )

“SUPER”, “HIGH”, “

STD”(STANDARD), “BASIC”,

“LONG”

Example : Set “PPS” of camera number “

” to “0.313P”

and “GRADE” to “HIGH” for normal recording.

1. Press the SET UP button to display the <SETTINGS> screen.

2. Turn the JOG dial to move the cursor to “RECORD

SETTINGS” and turn the SHUTTLE ring clockwise.

• The <RECORD SETTINGS> screen appears.

ALARM SETTING

RECORD SETTING

ALARM REC DURATION 5S

MOTION DET REC ALARM

ARCHIVE OVERWRITE OFF

ARCHIVE MEDIA AUTO EJECT OFF

3. Turn the JOG dial to move the cursor to “RECORD

SETTING” and then turn the SHUTTLE ring clockwise.

• The <RECORD SETTING> screen appears.

<RECORD SETTING> ALARM CH

NO PPS GRADE A-PPS A-GRADE

1.563P STD 1.563P STD

NEXT PAGE SHUTTLE<<:BACK

<RECORD SETTING> 1/2

Camera selection during alarm recording

<RECORD SETTING> ALARM CH

NO PPS GRADE A-PPS A-GRADE

1.563P STD 1.563P STD

PRE ALARM REC ( S ) S

SHUTTLE<<:BACK

<ESTD REC> D H M

<RECORD SETTING> 2/2

CAUTION : For <ESTD REC>, see

“Continuous recording time table”, pages 88,89.

About <ESTD REC>

• The estimated recordable time is displayed as <ESTD REC>

depending on the “PPS” and “GRADE” settings. (The time

will not change when changing the alarm recording settings.)

The RECORD SETTING consists of 2 pages.

The next page appears when select “NEXT PAGE”

as shown below in the screen and turn the SHUT-

TLE ring clockwise.

4. Check to see that the cursor is positioned at “

”, and

then turn the SHUTTLE ring clockwise.

• The “PPS” setting reverses in color.

<RECORD SETTING> ALARM CH

NO PPS GRADE A-PPS A-GRADE

1.563P STD 1.563P STD

NEXT PAGE SHUTTLE<<:BACK

5. Turn the SHUTTLE ring clockwise again.

• The background of the “PPS” setting turns red and flashes.

<RECORD SETTING> ALARM CH

NO PPS GRADE A-PPS A-GRADE

1.563P STD 1.563P STD

NEXT PAGE SHUTTLE<<:BACK

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 105 106

Comments to this Manuals

No comments

Mitsubishi Electric DX-TL2500E Instruction Manual Page 23

Comments to this Manuals

Related products and manuals for Recording Equipment Mitsubishi Electric DX-TL2500E