Mitsubishi Electric DX-TL2500E Instruction Manual Page 73
- Page / 106
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
73
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Operations
ENGLISH
<ALARM SKIP SEARCH>
>>
EXECUTE(FORWARD)
EXECUTE(REVERSE)
PUSH SEARCH KEY FOR
SEARCH SELECTION
To change the desired camera number to the single screen dis-
play during still-frame playback in SPLIT16 display, press the SEARCH
button to clear the search setting screen and press the desired cam-
era number button.
Search may not perform properly at times depending on the re-
corded condition of the index signals.
■ ALARM SKIP SEARCH
This function searches up to where the Alarm recording signal is located,
and can playback at 4 second intervals.
<ALARM SKIP SEARCH> In the case of forward direction
SKIP COUNT
0302
01
Alarm
Recording
Alarm
Recording
Alarm
Recording
Index signalIndex signalIndex signal
Search SearchSearch Search
Present position
Approx. 4 sec.
play
Approx. 4 sec.
play
Approx. 4 sec.
play
1. Press the SEARCH button.
• The search screen selected in the “SEARCH TYPE” ( see page 71 ) appears.
2. (When the desired search screen is not displayed on the screen • • • )
Change the above “SEARCH TYPE” setting and display the “ALARM SKIP
SEARCH” screen.
3. Select “EXECUTE(FORWARD)” or “EXECUTE(REVERSE)” and confirm.
• “EXECUTE(FORWARD)” : Search is performed in the forward direction.
• “EXECUTE(REVERSE)” : Search is performed in the reverse direction.
• To cancel the search, press the SEARCH button twice.
• Playback of search result from skip search will be in SPLIT16 display regardless
of whether the “SELECTION CAMERA NUMBER” ( see page 71 ) is set to
“ALL” or individual camera number is selected.
• To return to the normal screen, press the SEARCH button twice.
Press the desired camera number button when performing skip
search in SPLIT16 display, the video of the camera number button is
changed to single screen display.
4. Press the PAUSE button when the desired video is displayed and press the
PLAY button.
5. To stop ALARM SKIP SEARCH, press the STOP button.
6. To clear the search screen, press the SEARCH button twice.
When performing skip search in the reverse direction with index
signals of less than 4 seconds, that portion may play back repeat-
edly. In this case, press the STOP button to stop the search and
perform skip search in the reverse direction again after the particular
portion has been passed using reverse playback, etc.
Search may not perform properly at times depending on the re-
corded condition of the index signals.
- DX-TL2500E 1
- Features 2
- Caution and care 4
- MAINS LEAD CONNECTION 5
- Contents 6
- Flowchart 8
- Multiplex 10
- Beginning 11
- 10 11 12 13 14 15 16 12
- 14. RS-232C connector 14
- 15. ETHERNET connector 14
- 16. SCSI connector 14
- ■ Rear View (continued) 14
- Connections 15
- Connections (continued) 16
- AUTO SET UP (continued) 18
- Initial settings 19
- Basic Operations 20
- ♦ TIME DATE ADJUST 21
- Basic Operations (continued) 22
- INFORMATION 22
- <RECORD SETTING> 1/2 23
- ♦ TIME DATE SEARCH 25
- Menu functions 27
- Menu functions (continued) 28
- Operations 29
- • The setting is confirmed 33
- ENTRANCE 34
- COUNTER 34
- ■ DUPLEX MODE DISPLAY 35
- buttons 36
- 3. Press the ZOOM button 36
- ■ MPX DISPLAY SETTINGS 38
- ■ SPLIT/SEQUENCE 38
- ■ SPLIT4 SCREEN SETTING 38
- <SEQUENCE SETTING> 1/2 39
- <SEQUENCE SETTING> 2/2 40
- ■ TEST MODE 42
- ■ SENSITIVITY 42
- ■ MOTION THRESHOLD 42
- <RECORD SETTINGS> 43
- ■ PRE ALARM REC 44
- >> 45
- ■ TIMER PROGRAM SETTINGS 46
- ■ TIMER PROGRAM 46
- SPL 12:30 13:00 A ON 47
- SPL WED-SAT 47
- Program 2 48
- Program 1 Program 1 48
- IMAGE MODIFIED( ) 50
- ■ AUDIO RECORDING 51
- ■ REAR TERMINAL SETTINGS 52
- ♦ MODE OUT 1 ~ MODE OUT 5 52
- ♦ KEY SOUND 52
- ♦ BUZZER 52
- ■ INFORMATION/SERVICE 57
- ♦ WARNING LOG LIST 58
- ♦ RESET TO FACTORY SETTINGS 58
- To unlock the PASSWORD • • • 60
- ■ LANGUAGE SELECTION 61
- <QUICK SETTINGS> 62
- < Operation > 63
- < Setting > 63
- <RECORD SETTING C> 1/2 66
- <RECORD SETTING C> 2/2 66
- Various recordings 68
- Various playback functions 69
- ♦ SEARCH TYPE 71
- ♦ SELECTION CAMERA NUMBER 71
- ♦ DATE/TIME 71
- ♦ PLAYBACK DEVICE 71
- Various search (continued) 72
- ■ ALARM SKIP SEARCH 73
- ■ START/END SEARCH 75
- Making Copy/Restore 76
- Other convenient functions 78
- 1.563P STD 1.563P STD 80
- Communications by Web Browser 82
- Recording time table 88
- Recording Time Table 89
- Troubleshooting 90
- PERIPHRAL RECORDING DEVICE 91
- Warnings and CALL OUT output 92
- Glossary 94
- Specifications 95
- FRANÇAIS 98
- CASTELLANO 99
- Others (Continued) 100
- ITALIANO 100
- NEDERLANDS 101
- PORTUGES 102
- 872C275C5 PRINTED IN JAPAN 106
Related products and manuals for Recording Equipment Mitsubishi Electric DX-TL2500E
(31 pages)
(164 pages)
(172 pages)
(20 pages)© 2020, manymanuals.com. All rights reserved. | 0.585 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals