Mitsubishi Electric DX-TL2500E Instruction Manual download pdf (Page 44)

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

<RECORD SETTINGS> (continued)

When select and set the “TRIGGER” setting to

MD, MD/EXT or MD&EXT, the motion detection func-

tion will be active soon and any setting alteration

can not be accepted. Please use effectively the

ALARM INTERRUPT button to change the setting.

9. When the setting is complete, turn the SHUTTLE ring

counterclockwise.

• The cursor moves to the camera number on the left.

• When continuing with other camera number settings, turn

the JOG dial to move the cursor to the desired camera number

and repeat steps 4 ~ 9 to perform the settings.

10. (When setting recording intervals and recording picture

quality • • • )

Press the SET UP button

}

}

Select “RECORD

SETTING” in the <RECORD SETTINGS> screen and turn the

SHUTTLE ring clockwise.

• The <RECORD SETTING> screen appears.

<RECORD SETTING> ALARM CH

NO PPS GRADE A-PPS A-GRADE

1.563P STD 1.563P STD

NEXT PAGE SHUTTLE<<:BACK

<RECORD SETTING> 1/2

Camera selection during alarm recording

<RECORD SETTING> 2/2

CAUTION : For <ESTD REC>, see

“Continuous recording time table”, pages 88, 89.

Appears when “PARTITION”

(“LONG PRE-ALARM”) is set.

<RECORD SETTING> ALARM CH

NO PPS GRADE A-PPS A-GRADE

1.563P STD 1.563P STD

PRE ALARM REC ( S ) S

SHUTTLE<<:BACK

<ESTD REC> D H M %

The storage area in MAIN HDD set in “PARTI-

TION” is displayed with the percentage(%) and the

recordable time of that storage area is displayed in

“<ESTD REC>”.

The <RECORD SETTING> screen consists of 2

pages. The second page is displayed when turning

the JOG dial to move the cursor to “NEXT PAGE”,

and turn the SHUTTLE ring clockwise.

11. (When setting the recording intervals and recording picture

quality for normal recording

• • •

)

Turn the JOG dial to select the desired camera number and

turn the SHUTTLE ring clockwise twice.

• The background of the “PPS” display changes to red and flashes.

• Setting of “PPS” ( default : “1.563P” )

“3.125P”, “1.563P”, “1.042P”, “0.781P”, “0.625P”, “0.521P”,

“0.391P”, “0.313P”, “0.125P”, “0.063P”, “0.031P”, “0.016P”,

“- - - - - -”

“- - - - - -” : Recording cannot be performed with camera set

to this item.

Pressing the WARNING RESET button while the

cursor is on the left of the desired camera number

changes that camera’s “PPS” and “A-PPS” to “- - - - - -”.

For details concerning normal recording settings,

see “Setting the recording interval and recording

picture quality for normal recording” pages 23, 24.

12. Display the desired item to set and turn the SHUTTLE

ring clockwise.

• The setting is confirmed and flashing stops.

13. Turn the JOG dial clockwise to reverse display the

“GRADE” setting and turn the SHUTTLE ring clockwise.

• The background of the “GRADE” display changes to red

and flashes.

• Setting of “GRADE” ( default : “STD” )

“SUPER”, “HIGH”, “STD”(STANDARD), “BASIC”, “LONG”

14. Display the desired item to set and turn the SHUTTLE

ring clockwise.

• The setting is confirmed and flashing stops.

15. (When setting recording intervals and recording picture

quality for alarm recording • • • )

Repeat steps 11 ~ 14 and select desired settings for “A-PPS”

and “A-GRADE” as well.

16. When the setting is complete, turn the SHUTTLE ring

counterclockwise.

• The cursor moves to the camera number directly to the left.

17. When continuing with other camera number, turn the JOG

dial to move the cursor to the desired camera number and

repeat steps 11 ~ 16 for settings.

18. When completed with all settings, turn the SHUTTLE ring

counterclockwise or press the SET UP button.

■ PRE ALARM REC

The pre-alarm recording can be set.

563P

STD

563P

STD

PRE ALARM REC ( S ) S

SHUTTLE<<:BACK

<ESTD REC> D H M

Setting ( default : “0S” )

“0S”, “1S”, “2S”, • • • • • ,“58S”, “59S”, “60S”, “90S”,

“120S”, “150S”, “180S”

When “0S” is selected, the pre-alarm recording

is inoperable.

The maximum pre-alarm recordable time is dis-

played in “( )”. Beware that when set the pre-alarm

recording time longer than the maximum the set-

tings will turn red. Set the time within the recording

time limit, so that the display returns to white. Even

if the time is set beyond the limit, Pre-Alarm record-

ing time is not changed.

1. Press the SET UP button

}

}

<RECORD

SETTINGS>

}

Select “PRE ALARM REC” in the <RECORD

SETTING> 2/2 screen, and display the desired setting.

2. Turn the SHUTTLE ring counterclockwise or press the SET

UP button.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 105 106

Comments to this Manuals

No comments

Mitsubishi Electric DX-TL2500E Instruction Manual Page 44

Comments to this Manuals

Related products and manuals for Recording Equipment Mitsubishi Electric DX-TL2500E