51
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Operations
ENGLISH
Points to be careful of regarding archive
• When archive is performed during record, an image
may not be recorded at the time of an archive start and
an end. Be careful.
<HDD SETTINGS>
HDD REPEAT REC MAIN ON
HDD REPEAT REC SUB OFF
HDD REPEAT REC LPA OFF
HDD REPEAT PLAY OFF
IM-CHECK PLAY OFF
SEQUENTIAL PLAY OFF
FIFO OVERWRITE MODE OFF
>>
ARCHIVE SOURCE HDD MAIN
ARCHIVE START POSITION RESET
This setting is appeared when “ARCHIVE•COPY”
is selected on “ID4•ID5” of the <INITIALIZATION>
screen, and the “HDD SETTING” is selected on “PAR-
TITION” (“LONG PRE-ALARM”).
Settings ( default : “MAIN” )
“
MAIN” : Archive MAIN HDD only.
“SUB” : Archive SUB HDD only.
“LPA” : Archive LPA HDD only.
“LPA” is appeared when “LONG PRE-ALARM”
is selected on “HDD SETTING” of the <INITIALIZA-
TION> screen after installing EXTRA HDD to “IN-
TERNAL HDD A”.
1. Press the SET UP button
}
<SETTINGS>
}
<INITIAL SET
UP/INFORMATION>
}
Select “ARCHIVE SOURCE HDD” in
the <HDD SETTINGS> screen, and display the desired setting.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
3. Press the ARCHIVE button.
• The ARCHIVE device commences archive.
♦ ARCHIVE START POSITION RESET
The unit automatically keeps track of the end point of HDD
archive. This function is used to reset this ARCHIVE POINT.
After reset, the ARCHIVE POINT returns to the position of
the earliest stored data.
<HDD SETTINGS>
HDD REPEAT REC MAIN ON
HDD REPEAT REC SUB OFF
HDD REPEAT REC LPA OFF
HDD REPEAT PLAY OFF
IM-CHECK PLAY OFF
SEQUENTIAL PLAY OFF
FIFO OVERWRITE MODE OFF
ARCHIVE SOURCE HDD MAIN
>>
ARCHIVE START POSITION RESET
This setting is appeared when “ARCHIVE•COPY” is
selected on “ID4•ID5” of the <INITIALIZATION> screen.
Confirm that the peripheral recording device is
correctly connected to ID4 or ID5, and “ARCHIVE•
COPY” is selected on “ID4•ID5” before making AR-
CHIVE START POSITION RESET settings.
1. Press the SET UP button
}
<SETTINGS>
}
<INITIAL SET UP/
INFORMATION>
}
Select “ARCHIVE START POSITION RESET”
in the <HDD SETTINGS> screen, turn the SHUTTLE ring clockwise.
• The <ARCHIVE START POSITION RESET> screen is
displayed.
<ARCHIVE START POSITION RESET>
>>
EXECUTE
2. Turn the SHUTTLE ring clockwise.
• The ARCHIVE POINT is reset.
■ AUDIO RECORDING
This unit can simultaneously record audio along with the
video. When recording audio, the continuous recording time
becomes shorter than when recording only video.
<INITIAL SET UP/INFORMATION>
HDD SETTINGS
>>
AUDIO RECORDING OFF
REAR TERMINAL SETTINGS
COMMUNICATION PORT SETTINGS
CAMERA CONTROL
INFORMATION/SERVICE
PASSWORD
LANGUAGE SELECTION
Setting ( default : “OFF” )
“ON” : Records video and audio.
“ALARM” : During alarm recording or emergency re-
cording, records video and audio.
“
OFF” : Does not record audio.
1. Press the SET UP button
}
<SETTINGS>
}
Select “AUDIO
RECORDING” in the <INITIAL SET UP/INFORMATION>
screen. Display the desired setting and confirm.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
When setting “AUDIO RECORDING” to “ON”, a
speaker display (
) appears to the right of record-
able time display in the <RECORD SETTING> and
<RECORD SETTING A> ~ <RECORD SETTING
D> screens.
<RECORD SETTING> 2/2
<RECORD SETTING> ALARM CH
NO PPS GRADE A-PPS A-GRADE
>>
1.563P STD 1.563P STD
1.563P STD 1.563P STD
1.563P STD 1.563P STD
1.563P STD 1.563P STD
1.563P STD 1.563P STD
1.563P STD 1.563P STD
1.563P STD 1.563P STD
PRE ALARM REC ( S ) S
SHUTTLE<<:BACK
<ESTD REC> D H M
10
11
13
14
15
16
12
Even when setting “AUDIO RECORDING” to
“ON”, audio cannot be recorded for the following
settings.
Comments to this Manuals