Mitsubishi Electric DX-TL950E Instruction Manual download pdf (Page 19)

ENGLISH

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Basic Operations

■ Multiplexer functions

Buttons on the front of the unit can be used to perform

some of the multiplexer functions.

♦ Multiplexer buttons

MOVE button

2 SPLIT/SEQUENCE button

3 ZOOM button

1 Camera number buttons (1 to 9)

SPLIT/

SEQUENCE

ZOOM / 0

56789

1234

1. Camera number buttons (1 to 9)

Video images of cameras connected to CAMERA IN termi-

nals 1 to 9 on the rear of the unit are displayed.

By pressing a camera number button, video im-

ages can be displayed even if the camera is not set

for recording.

2. SPLIT/SEQUENCE button

The screen switches in order of SPLIT9 SCREEN

SETTING, 3 types of SPLIT4 SCREEN SETTING (a, b and

c), SPLIT4 SEQUENTIAL and SINGLE SEQUENTIAL set

in the <MPX DISPLAY SETTINGS> screen (SEQUENTIAL

display is skipped during playback).

Pressing the ZOOM button for more than 1

second on the front of this unit can switch the

operation of camera number buttons and the SPLIT/

SEQUENCE button to the screen of the monitor

connected to the OUTPUT B connector. Pressing

the ZOOM button for more than 1 second again can

switch to the screen of the monitor connected to the

OUTPUT A connector.

3. ZOOM button

When this button is pressed during single screen display,

magnification 100% screen appears and the magnification

centre point (X) is displayed at the centre. Pressing the

button again will switch the magnification to 200% and then

400%. By pressing the MOVE buttons, the magnified screen

can be moved vertically/horizontally with the centre point

as the axis (

see “ZOOM button operations”, page 35).

When the ZOOM button is pressed, camera number

buttons 1 to 4 become the MOVE buttons.

■ Menu settings

The operational conditions of this unit can be set in the

menu screens according to use. Although the setting

method will differ slightly depending on the menu screen,

the basic setting method of using the JOG dial and SHUT-

TLE ring will remain the same. e.g. setting the display

mode.

SHUTTLE ring

JOG dial

Example : Set DISPLAY MODE to “3” ( default : “1” ).

1. Set the MAIN switch on the rear of the unit to ON. Press

the POWER button on the front after the ACCESS indicator

turns off.

• “SETTING UP...” appears on the screen and the unit is

booted.

POWER button operation will not be accepted

while the ACCESS indicator is flashing. Press the

POWER button after the indicator turns off.

2. After boot-up, press the SET UP button inside the door on

the front of the unit.

• The <SETTINGS> screen appears.

TIME DATE/DISPLAY SETTINGS

MPX DISPLAY SETTINGS

MOTION DETECTION SETTINGS

RECORD SETTINGS

TIMER PROGRAM SETTINGS

INITIAL SET UP/INFORMATION

QUICK SETTINGS

MEMO:

When the SET UP button is pressed and the

menu screen appears, the background darkens and

the displayed characters become easier to see.

3. Check to see that the cursor (>>) is positioned at “TIME

DATE/DISPLAY SETTINGS”, and then turn the SHUTTLE ring

clockwise.

• The <TIME DATE/DISPLAY SETTINGS> screen appears (

see page 32).

TIME DATE ADJUST

DISPLAY MODE 1

CLOCK LOCATION SETTING

CAMERA DISPLAY NUMBER

CAMERA TITLE/MEMO SETTING

DUPLEX MODE DISPLAY BOTTOM

01-01-2004 00:00:00

4. Turn the JOG dial to move the cursor to “DISPLAY MODE”

and turn the SHUTTLE ring clockwise.

• The background of the “DISPLAY MODE” setting turns red

and flashes.

When turning the JOG dial clockwise, the cursor

(>>) moves down. When turning counterclockwise,

the cursor (>>) moves up.

5. Turn the JOG dial to display “3”.

• The display mode sample on the bottom of the screen

changes to <MODE 3>.

6. Turn the SHUTTLE ring clockwise.

• The setting is confirmed and flashing stops.

• To continue with other settings, repeat steps 4 and 5.

When turning the SHUTTLE ring counterclockwise

while the setting is flashing, the setting will return to

the previous setting.

To exit the screen, turn the SHUTTLE ring

counterclockwise.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 107 108

Comments to this Manuals

No comments

Mitsubishi Electric DX-TL950E Instruction Manual Page 19

Comments to this Manuals

Related products and manuals for Recording Equipment Mitsubishi Electric DX-TL950E