Mitsubishi Electric DX-TL950E Instruction Manual download pdf (Page 39)

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Operations

ENGLISH

• Display “ • ” for the left half of the screen to inactivate

motion detection.

1. In “SELECTION CAMERA NUMBER , select the camera

for setting the detection area.

2. Select “DETECTION MASK SETTING” and turn the

SHUTTLE ring clockwise.

• The dotted screen with detection areas is displayed and the

background of the most upper left dot turns red and flashes.

& & &&&&&&&&&& &&&&

3. Use the

, , and

buttons to select the dot to activate/

inactivate and press the camera number button

• The “

& ” (active) setting changes to “ • ” (inactive) setting.

• & &&&&&&&&&& &&&&

& & &&&&&&&&&& &&&&

When pressing the SPLIT/SEQUENCE button,

all dots change to “ & ” (active). When pressing the

ZOOM button, all dots change to “ • ” (inactive).

When pressing the camera number

button,

dot change to “ • ” (inactive). When pressing the

camera number

button, dot change to “ & ”

(active).

4. Repeat step 3 to activate/inactivate all desired dots.

• • ••••••&&&& &&&&

5. Turn the SHUTTLE ring counterclockwise.

• The setting is confirmed and the display returns to the

<MOTION DETECTION SETTINGS> screen.

During set detection mask setting, other settings

are not accepted. To exit the menu screen during

setting, turn the SHUTTLE ring counterclockwise.

In this menu, the conditions of the motion detection func-

tion for normal recording and alarm recording, which is

started when detecting motion within the video of the con-

nected camera, are set.

■ SELECTION CAMERA NUMBER

The camera for motion detection setting is selected. Since

settings can be made for each camera, more detailed set-

tings are possible.

SELECTION CAMERA NUMBER

DETECTION MASK SETTING

SENSITIVITY HIGH••<<<LOW

MOTION THRESHOLD 5

TEST MODE

Setting ( default : “

” )

“

”, “

”,

“

”

When selecting the <MOTION DETECTION

SETTINGS> screen during single screen display of

any specified camera number, that camera will be

displayed as the initial value of “SELECTION CAM-

ERA NUMBER”.

1. Press the SET UP button

}

}

Select

“SELECTION CAMERA NUMBER” in the <MOTION

DETECTION SETTINGS> screen. Display the desired setting

and confirm.

Confirm the “SELECTION CAMERA NUMBER”

setting to switch the background to the video of the

selected camera number.

2. Turn the SHUTTLE ring counterclockwise or press the SET

UP button.

The motion detection function will not operate

when the <MOTION DETECTION SETTINGS>

screen is displayed.

■ DETECTION MASK SETTING

The area to activate motion detection is set here. Any of

the 192 dotted detection areas displayed by splitting indi-

vidually loaded video to equal 16 X 12 pixel sizes can be

selected and set.

Definition of setting mark ( default : all areas “ & ” (active) )

“

& ” : Area activated with motion detection.

“ • ” : Area inactivated with motion detection.

It is possible to set various areas per camera.

Example of screen setting

For the video loaded from the camera set in “SELECTION

CAMERA NUMBER” :

• Display “ & ” for the right half of the screen to activate

motion detection.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 107 108

Comments to this Manuals

No comments

Mitsubishi Electric DX-TL950E Instruction Manual Page 39

Comments to this Manuals

Related products and manuals for Recording Equipment Mitsubishi Electric DX-TL950E