Mitsubishi Electric DX-TL950E Instruction Manual Page 68
- Page / 108
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
68
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Various search (continued)
<ALARM INDEX SEARCH>
>>
INDEX 01
EXECUTE(FORWARD)
EXECUTE(REVERSE)
MAIN
START 02-02-2004 00:00:00
END 04-04-2004 12:30:15
PUSH SEARCH KEY FOR
SEARCH SELECTION
<INDEX SEARCH>
>>
INDEX 01
EXECUTE(FORWARD)
EXECUTE(REVERSE)
MAIN
START 02-02-2004 00:00:00
END 04-04-2004 12:30:15
PUSH SEARCH KEY FOR
SEARCH SELECTOIN
■ INDEX SEARCH/ALARM INDEX SEARCH
With this unit, index signals are automatically written to the HDD at the start
of each recording. It is possible to search these signals and playback start-
ing at such index points.
There are 2 types of index searches :
• <INDEX SEARCH> : Searches index signals written when starts recording.
• <ALARM INDEX SEARCH> : Searches index signals written when starts
alarm recording and emergency recording.
Up to 99 indexes can be searched in either forward/reverse direction.
How indexes are counted for <INDEX SEARCH>, <ALARM INDEX
SEARCH>
INDEX COUNT
99 02 01
99
02
01
RecordingRecording RecordingRecording
Recording
Recording
Index
signal
Index
signal
Index
signal
Index
signal
Index
signal
Index
signal
Forward
Reverse
Present
position
( ) ( ) ( ) ( ) ( ) ( )
( ) : Normal recording for INDEX SEARCH. Alarm recording or emergency
recording for ALARM INDEX SEARCH.
1. Press the SEARCH button.
• The search screen selected in the “SEARCH TYPE” ( see page 67) appears.
“SELECTION CAMERA NUMBER” setting will not appear if “IN-
DEX SEARCH” is set.
2. (When the desired search screen is not displayed on the screen • • • )
Change the previous “SEARCH TYPE” setting and display the “INDEX SEARCH”
screen or “ALARM INDEX SEARCH” screen.
• When searching index signals of normal recording, display the “INDEX SEARCH”
screen.
• When searching index signals of alarm recording or emergency recording,
display the “ALARM INDEX SEARCH” screen.
• After performing INDEX SEARCH/ALARM INDEX SEARCH :
• SPLIT9 screen is always displayed for INDEX SEARCH.
• For ALARM INDEX SEARCH, SPLIT9 screen is displayed when setting the
“SELECTION CAMERA NUMBER” ( see page 67) to “ALL”. Single
screen with still frame playback is displayed when selecting individual
camera number.
When execute “ALARM INDEX SEARCH” while the “PARTITION”
is set, set to “SUB” in “PLAYBACK DEVICE”.
The camera number written by the start index signal of the pre-
alarm recording may differ from the camera number displayed in the
alarm list.
3. Display the desired setting in “INDEX” and confirm.
4. Select “EXECUTE(FORWARD)” or “EXECUTE(REVERSE)” and confirm.
• “EXECUTE (FORWARD)” : Search is performed in the forward direction.
• “EXECUTE (REVERSE)” : Search is performed in the reverse direction.
• To cancel the search, press the SEARCH button twice.
• Search will not be performed if there are no index signals. To return to the normal
screen, press the SEARCH button twice.
Search may take time, depending on the recording status of the
index signal. Press the STOP button while searching to end search.
If the intervals of the index are long, search may continue for
hours.
5. Playback the search result.
• Press the PLAY (REV. PLAY) or PAUSE button.
- DX-TL950E 1
- Features 2
- Caution and care 4
- MAINS LEAD CONNECTION 5
- Contents 6
- Flowchart 8
- see page 37 10
- 19 20 21 22 23 24 11
- Beginning 13
- Connections 15
- Connections (continued) 16
- AUTO SET UP 17
- AUTO SET UP (continued) 18
- Basic Operations 19
- Basic Operations (continued) 20
- INFORMATION 21
- REC/STOP 23
- Menu functions 26
- SUB MENU (1) 27
- MAIN MENU 27
- SUB MENU (2) 27
- SUB MENU (3) 27
- Menu functions (continued) 28
- SUB MENU (1) SUB MENU (2) 29
- • The setting is confirmed 32
- Operations 33
- ■ DUPLEX MODE DISPLAY 34
- <MPX DISPLAY SETTINGS> 35
- see page 76) 36
- ■ MPX DISPLAY SETTINGS 37
- ■ SPLIT4 SCREEN SETTING 37
- ■ SPLIT9 SCREEN SETTING 37
- ■ SEQUENCE SETTING 38
- ■ INTERLACE 38
- ■ SELECTION CAMERA NUMBER 39
- ■ DETECTION MASK SETTING 39
- ■ SENSITIVITY 40
- ■ MOTION THRESHOLD 40
- ■ TEST MODE 40
- <RECORD SETTINGS> 41
- About alarm recording 42
- ■ ALARM REC DURATION 43
- ■ PRE ALARM REC 43
- ■ MOTION DET REC 43
- ■ TIMER PROGRAM SETTINGS 44
- ■ TIMER PROGRAM 44
- SPL 12:30 13:00 A ON 45
- SPL WED-SAT 45
- Program 2 46
- Program 1 Program 1 46
- IMAGE MODIFIED( ) 47
- >> 47
- ♦ SEQUENTIAL PLAY 48
- ■ AUDIO RECORDING 48
- ■ INFORMATION/SERVICE 54
- ■ PASSWORD 56
- ■ LANGUAGE SELECTION 58
- <QUICK SETTINGS> 59
- Operation examples 60
- ■ Operation example 2 61
- ■ Operation example 3 62
- Various recordings 64
- Various playback functions 65
- 1-2. Press the PLAY button 66
- Various search 67
- Various search (continued) 68
- ■ ALARM SKIP SEARCH 69
- ■ START/END SEARCH 71
- Making Copy/Restore 72
- Other convenient functions 74
- ■ COVERT CAMERA SETTING 76
- Communications by Web Browser 77
- Recording time table 83
- Recording Time Table 84
- Troubleshooting 85
- Troubleshooting (continued) 86
- CALL OUT 87
- Warnings and CALL OUT output 88
- Glossary 89
- Specifications 90
- FRANÇAIS 93
- CASTELLANO 95
- ITALIANO 97
- Others (Continued) 100
- NEDERLANDS 100
- PORTUGES 101
- 872C277A9 PRINTED IN MALAYSIA 108
Related products and manuals for Recording Equipment Mitsubishi Electric DX-TL950E
(95 pages)
(31 pages)
(164 pages)
(172 pages)
(20 pages)© 2020, manymanuals.com. All rights reserved. | 0.617 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals