Mitsubishi Electric MSZ-FE12NA Service Manual download pdf (Page 19)

Operation and operating range

i-see sensor moves 30 degrees from the center in both right and left side.

i-see Sensor operates as follows in accordance with AREA setting made with the remote controller.

“AUTO” in AREA setting: first turning to the LEFT for adjusting the position then ·····

CENTER RIGHT CENTER LEFT CENTER ·····

(The sensor turns to the right, left and center.)

“RIGHT” in AREA setting: first turning to the LEFT for adjusting the position then ·····

CENTER RIGHT CENTER RIGHT CENTER ·····

(The sensor turns to the right and center.)

“LEFT” in AREA setting: first turning to the LEFT for adjusting the position then ·····

CENTER LEFT CENTER LEFT CENTER ·····

(The sensor turns to the left and center.)

The sensor finishes turning to one area to another for 3 seconds and it operates one area for 5 seconds.

i-see Sensor turning to the right

i-see Sensor turning to the center

i-see Sensor turning to the left

8-8. TIMER OPERATION

1. How to set the time

(1) Check that the current time is set correctly.

NOTE: Timer operation will not work without setting the current time. Initially “0:00 AM” blinks at the current time dis-

play of TIME MONITOR, so set the current time correctly with CLOCK SET button.

How to set the current time

(a) Press the CLOCK set button.

(b) Press the TIME SET buttons (

and

) to set the current time.

• Each time FORWARD button (

) is pressed, the set time increases by 1 minute, and each time

BACKWARD button (

) is pressed, the set time decreases by 1 minute.

• Pressing those buttons longer, the set time increases/decreases by 10 minutes.

(2) Press OPERATE/STOP (ON/OFF) button to start the air conditioner.

(3) Set the time of timer.

ON timer setting

(a) Press ON TIMER button (

) during operation.

(b) Set the time of the timer using TIME SET buttons (

and

OFF timer setting

(a) Press OFF TIMER button

( )

during operation.

(b) Set the time of the timer using TIME SET buttons (

and

Each time FORWARD button (

) is pressed, the set time increases by 10 minutes: each time BACKWARD but-

ton (

) is pressed, the set time decreases by 10 minutes.

2. To release the timer

To release ON timer, press ON TIMER button (

To release OFF timer, press OFF TIMER button (

TIMER is cancelled and the display of set time disappears.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

Comments to this Manuals

No comments

Mitsubishi Electric MSZ-FE12NA Service Manual Page 19

Comments to this Manuals

Related products and manuals for Split-system air conditioners Mitsubishi Electric MSZ-FE12NA