Mitsubishi Electric FR-A5NR Instruction Manual Page 30
- Page / 57
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
27
Monitor
FUNCTIONS
2
(2) Trace function setting screen
By changing the set values on the trace function setting screen and writing them to the parameters, you can
change the parameter settings of the inverter. (Refer to page 28 for details of the parameters.)
Trace function setting screen
1) Function setting [Pr. 520 to Pr. 529]
Select the data of CH1 to CH10. The selected data are displayed.
You can assign one piece of data to two or more channels.
Selecting the data changes the Pr. 520 to Pr. 529 values.
2) Sample Ti
me [Pr. 530]
Vary the sampling period. (1 = 444s)
Varying the sampling period changes the Pr. 530 value.
3) Sample M
ode [Pr. 531]
Set the number of samplings made at one time. Increasing the sampling count limits the number of data that
can be traced.
Changing the sampling mode changes the Pr. 531 value.
4) T
rigger Signal 1 [Pr. 532]
A specific signal times the start and end of a trace.
Changing the trigger signal choice 1 changes the Pr. 532 value.
5) Trig
ger Signal 2 [Pr. 533]
When you have selected "Error (trigger signal choice 2)" in the trigger signal choice 1, select the error that
will output a trigger signal.
Changing the trigger signal choice 2 changes the Pr. 533 value.
6) Trigger L
evel [Pr. 534]
A trigger is enabled when the value of the data set in the trigger signal choice 1 reaches the set trigger level
on the trigger condition.
Changing the trigger level changes the Pr. 534 value.
7) Trigger conditions [Pr. 535]
Select whether a trigger will be enabled on the "leading edge" or on the "trailing edge".
Changing the trigger condition changes the Pr. 535 value.
8) P
re-trigger [Pr. 536]
Used to trace the data before trigger.
Specify the percentage of the trigger point on the assumption that the recording starting point is 0% and the
recording end point is 100%.
Changing the pre-trigger changes the Pr. 536 value.
9) V
iew Parameter
Clicking [View Parameter] shifts to the parameter check screen.
10) Cancel
Clicking [Cancel] cancels function changing and returns to the trace function oscilloscope screen.
CAUTION
The trace function setting screen is used to only set the parameter values and not to write them. Use the
parameter check screen to write them. Click [Parameter check]. (Refer to page 32 for details of the
parameter check screen.)
1)
4
)
5)
6)
8)
7)
3)
2)
10)
9)
- FR-SW1-SETUP-WE 1
- INTRODUCTION 2
- For Maximum Safety 2
- 1 OVERVIEW 1 3
- 2 FUNCTIONS 7 3
- 3 ERROR INDICATIONS 45 3
- 4 APPENDICES 47 3
- OVERVIEW 4
- Before Using This Software 5
- 1.1.1 Packing list 5
- 1.2 Preparations for Startup 6
- Preparations for Startup 7
- FUNCTIONS 10
- <Primary screen> 11
- <Initial screen> 11
- 2.2 Settings 12
- Settings 13
- 2.2.1 System Settings 14
- 2.2.2 Communication Settings 15
- 2.2.3 Environmental Setting 16
- 2.3 Parameter 17
- Parameter 18
- FUNCTONS 18
- 2.3.2 Functional List Format 20
- 2.3.3 Individual List Format 21
- 2.3.4 Basic Settings 22
- 2.4 Monitor 23
- Max Val 24
- Present Val 24
- [Operating procedure] 25
- 2.4.4 Alarm History 26
- <Installation> 27
- 15) Reference Data 29
- (3) Parameter list 31
- (4) Parameter details 31
- (5) Parameter check 35
- 2.5 Diagnosis 36
- Diagnosis 37
- 2.6 Test Running 38
- Test Running 39
- 2.7 Advanced Function 40
- Advanced Function 41
- 2.8.1 File types 45
- 2.8.2 Saving method 45
- 2.8.3 Reading the file 45
- 2.8.4 Printing 45
- 2.9 Help 46
- ERROR INDICATIONS 48
- 3.1 Error codes 49
- APPENDICES 50
- 4.1 Supplementary Software 51
- Supplementary Software 52
- APPENDICES 52
- REVISIONS 57
Related products and manuals for Power adapters & inverters Mitsubishi Electric FR-A5NR
(23 pages)Extron electronic MSW 4V rs manuals
Owner’s manuals and user’s guides for Computer Accessories Extron electronic MSW 4V rs.
We providing 1 pdf manuals Extron electronic MSW 4V rs for download free by document types: User Manual
Comments to this Manuals