Mitsubishi Electric PC36 Instruction Manual download pdf (Page 11)

1. FUNCTIONS AND CONFIGURATION

1 - 4

(1) MR-J3-350T or less/MR-J3-200T4 or less

(a) Installation of the unit

Guide pins

Guide hole

Unit

(MR-J3-T10)

1) Remove the cover of connector for connecting

an option. Make sure to store the removed

cover.

2) Find the guide hole on the side of the servo

amplifier. To the guide hole, insert the unit's

guide pins.

Knobs

3) Push the unit until the knobs click.

4) Tighten the unit with the enclosed installing

screw (M4).

(b) Removal of the unit

1) Remove the installing screw.

2) Keep pushing the knobs ( a) , b)) and pull out

the unit to the arrow direction. Avoid pulling out

the unit while it is tightened with the installation

screw.

When removing the unit, make sure to reinstall the

cover of connector for connecting an option to

avoid dust and dirt.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 49 50

No comments

Mitsubishi Electric PC36 Instruction Manual Page 11