Mitsubishi Electric PC36 Instruction Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 50
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
5. TROUBLESHOOTING
5 - 4
5.3 Remedies for warnings
If [AL. 98 Software limit warning] and [AL. E6 Servo forced stop warning] occur, the servo off status is
established. If any other warning occurs, operation can be continued but an alarm may take place or proper
operation may not be performed.
Remove the cause of warning according to this section. Use MR Configurator/MR Configurator2 to refer to a
factor of warning occurrence.
No. Name Description Cause Action
97 Next station
warning (out of
setting range
warning)
Setting error of point
table/next station/speed
selection
A number for point table/next
station/speed selection has been set
with the master station.
For the point table/next
station/speed selection, set a
number within the setting range
with the master station.
9D CC-Link IE
warning 1
1. The station number switch setting
has been changed after power-on.
Return to the setting at power-
on.
The station number switch or
baud rate switch setting has
been changed after power-on.
2. The setting at the master station
side is incorrect.
Review the setting on the master
station side.
9E CC-Link IE
warning 2
Communication error with the
cable.
1. The transmission status is
abnormal.
Take the noise reduction
measures.
2. CC-Link IE Field Network
connector has come off.
3. CC-Link IE Field Network cable
wiring incorrect.
4. CC-Link IE Field Network cable
faulty.
1. Connect the cable or
connector correctly.
2. Change the CC-Link IE Field
Network cable.
5. Communication with the master
station is abnormal.
Review the communication
setting on the master station
side.
6. Data is looped back to its own
station in a ring connection.
1. Connect the cable or
connector correctly.
2. Change the CC-Link IE Field
Network cable.
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 49 50

Comments to this Manuals

No comments