Mitsubishi Electric PC36 Instruction Manual download pdf (Page 3)

A - 2

1. Transportation and installation

CAUTION

Transport the products correctly according to their mass.

Stacking in excess of the limited number of product packages is not allowed.

Install the servo amplifier and servo motor in a load-bearing place in accordance with the Instruction

Manual.

Do not get on or put heavy load on the equipment.

Install the equipment in the specified direction.

Provide an adequate protection to prevent screws and other conductive matter, oil and other combustible

matter from entering the unit.

This unit is a precision instrument. Do not drop or strike the unit. Isolate it from all impact loads.

Store and use this unit in the environment conditions described in the section 1.3.

When the equipment has been stored for an extended period of time, contact your local sales office.

2. Wiring

CAUTION

Wire the equipment correctly and securely. After wiring, check again for incorrect wiring and tightening of

terminal screws, etc. Otherwise, the servo motor may operate unexpectedly.

3. Usage

CAUTION

Immediately shut off the power supply if smoke, abnormal noise, or odor arises from this unit.

Disassembly and repair must be performed by a qualified person.

Do not modify the equipment.

4. Corrective actions

CAUTION

When any alarm has occurred, eliminate its cause, ensure safety, and deactivate the alarm before

restarting operation.

Provide an adequate protection to prevent unexpected restart after an instantaneous power failure.

5. Maintenance, inspection and parts replacement

CAUTION

Do not touch connector contacts and leads of the IC and other devices.

Do not place the unit on a metal object which is vulnerable to electric leakage, or on a wooden object

where static electricity may be charged. Do not place the unit on the object made of materials such as

plastic and vinyl.

Do not perform an insulation resistance test (megger test) at inspection.

1 2 3 4 5 6 7 8 ... 49 50

No comments

Mitsubishi Electric PC36 Instruction Manual Page 3