Mitsubishi Electric UD8400U-W User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 76
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
EN-17
When the vertical arc adjustment is positive (+) (or
the ARC is adjusted in the X direction)
Press the
S
button.
Press the
W
button.
Press the
X
button.
Press the
T
button.
When you press the W or X button in the RESET
mode, the distortion correction is reset.
Important:
When the CURVED-mode adjustment takes effect,
the resolution decreases. In addition, stripes may
appear or straight lines may bend in images with
complicated patterns. They are not due to product
malfunctions.
When the CURVED-mode adjustment is performed,
the displayed image may be distorted.
Depending on the installation conditions of the
projector and the screen or the correction amount
of the CURVED-mode adjustment, you may not
obtain a complete rectangular screen or the correct
aspect ratio. Slight distortion can be corrected by
the CORNERSTONE-mode adjustment.
Noise may appear on the screen during the
CURVED-mode adjustment because of the type
of the video signal being projected and the setting
values of the CURVED-mode adjustment. In such
cases, set the CURVED-mode adjustment values
in the range where the image is displayed without
noise.
When you carry out the KEYSTONE-mode
adjustment and the CURVED-mode adjustment
in combination, the adjustment range becomes
narrower than that in the case where you carry out
these adjustments individually. When setting the
arc setting value of the CURVED-mode adjustment
to 31 or larger, you cannot use the KEYSTONE-
mode adjustment.
When carrying out the CURVED-mode adjustment
while the option lens is in use, you may not be
able to obtain a perfectly rectangular image or
the correct aspect ratio. Slight distortion can
be corrected by the CORNERSTONE-mode
adjustment.
Setting up your projector (continued)
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 75 76

Comments to this Manuals

No comments