Mitsubishi Electric UD8400U-W User Manual download pdf (Page 57)

EN-57

Split

You can split the screen in two and display a computer

image on the left screen and a video image on the

right screen.

Left screen Right screen

To use the split mode:

1. Press the SPLIT button on the remote control.

• The screen is split in two and the left and right

screens display the following images:

- Left screen: Image supplied to the last

selected input source,

COMPUTER1, COMPUTER2,

DVI, HDMI, or SDI

Right screen: Image supplied to the last

selected input source, VIDEO

or S-VIDEO

• When you press the SPLIT button again, the

screen is displayed in the normal mode.

• Also, when you press the MENU button or

change the input source, the screen is displayed

in the normal mode.

• In the split mode, the picture quality settings

of the input source in the normal mode to be

displayed on the left screen are reﬂ ected on the

entire screen.

•

When no signal is input, a blue screen is

displayed.

• When you input an interlace signal to the left

screen, the displayed image may shake up and

down slightly, but this is not a malfunction.

• When you display 60-Hz and 50-Hz video

signals at the same time, motion images may

not be displayed properly. In this case, set VERT.

SYNC. of USER in the SIGNAL menu to OFF for

the left screen. (See page 39.)

• When BACK COLOR of the INSTALLATION 2

menu is set to IMAGE, you cannot use the split

mode unless a video signal is being input.

To change the input source of the left or right screen:

• To change the input source of the left screen, press

the W button on the remote control.

• To change the input source of the right screen,

press the X button on the remote control.

Advanced features (continued)

Freeze

To stop the motion in the image temporarily (or to

display a still image):

Press the FREEZE button on the remote control.

• The image will freeze temporarily.

To resume the motion in the image:

Press the FREEZE button on the remote control again.

Important:

• Do not display a still picture for a long time

because the afterimages may persist on the screen.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 75 76

Comments to this Manuals

No comments

Mitsubishi Electric UD8400U-W User Manual Page 57

Comments to this Manuals

Related products and manuals for Data projectors Mitsubishi Electric UD8400U-W