Mitsubishi Electric UD8400U-W User Manual download pdf (Page 47)

EN-47

11. Press the ENTER button.

SETTING - BLACK LEVEL

INTERLOCKED

RED

GREEN

BLUE

12. Select an item you want to set by pressing the S or

T button.

• Adjust the black level in areas other than the

overlapped areas.

• When you set INTERLOCKED to ON, you can

adjust RED, GREEN, and BLUE simultaneously.

When you set it to OFF, you can adjust RED,

GREEN, and BLUE separately.

13.

Select a setting value by pressing the W or X button.

Repeat steps 12 to 13, if necessary.

14. Press the MENU button once.

15. Select BRIGHT UNIFORMITY CORRECTION by

pressing the W or X button.

• When EDGE BLENDING is ON, the brightness of

the projected images is made even.

SETTING

BRIGHT UNIFORMITY

CORRECTION

16. Press the ENTER button.

• The BRIGHT UNIFORMITY CORRECTION

dialog box and the correction position marker

are displayed.

POSITION :

SELECT : ENTER

Correction position marker

BRIGHT UNIFORMITY CORRECTION dialog box

•

Every time you press the ENTER button, the

BRIGHT UNIFORMITY CORRECTION dialog box

shows POSITION and LEVEL alternately.

POSITION

POSITION :

SELECT : ENTER

Press the S, T, W, or X

button to move the correction

position marker.

LEVEL

LEVEL : 100

SELECT : ENTER

Press the W, or X button to

adjust the correction amount.

17. Cancel the BRIGHT UNIFORMITY CORRECTION

dialog box.

Press any button other than the S, T, W, or X,

and ENTER buttons to clear the dialog box.

Or, the dialog box disappears in 10 seconds after

the last use.

To cancel the menu:

18. Press the MENU button.

Adjusting projected images (continued)

Adjusting the image displayed on

the multi-screen

You can conﬁ gure a multi-screen display using

multiple projectors.

You can make the joints of the images displayed on

the projectors unnoticeable and adjust the differences

in the brightness and the color tint of them.

Important:

• Depending on the installation condition, the projected

image may ﬂ uctuate due to the effect of the exhausted

wind. In such a case, open up the space between

the projectors so that the image doesn’t ﬂ uctuate

(approximately 70 cm or more).

Making the joints unnoticeable

You can make the joints of the images projected on

the projectors unnoticeable using the menu settings.

(See page 32 for menu setting.)

1. Display the MULTI-SCREEN menu.

2. Select EDGE BLENDING by pressing the S or T

button.

EDGE BLENDING

OFF

3. Select ON by pressing the W or X button.

4. Select SETTING by pressing the S or T button.

SETTING

EDGE ADJUST

5. Select EDGE ADJUST by pressing the W or X

button.

6. Press the ENTER button.

SETTING - EDGE ADJUST

EDGE SELECT

BLENDING

WIDTH

MARKER

OFF

128

OFF

7. Select an item you want to set by pressing the S or

T button.

EDGE SELECT

Select the joint you want to adjust from UP, LOW,

LEFT, and RIGHT.

BLENDING

When you select ON, the joint selected by EDGE

SELECT becomes unnoticeable.

WIDTH

Set the width of the overlap of the joint selected by

EDGE SELECT.

When UP or LOW is selected: 4 to 524

When LEFT or RIGHT is selected: 4 to 944

MARKER

When you select ON, a marker for easily locating

the overlap of the joint is displayed.

Select a setting value by pressing the W or X button.

Repeat steps 7 to 8, if necessary.

9. Press the MENU button once.

10.

Select BLACK LEVEL by pressing the W or X

button.

SETTING

BLACK LEVEL

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 75 76

Comments to this Manuals

No comments

Mitsubishi Electric UD8400U-W User Manual Page 47

Comments to this Manuals

Related products and manuals for Data projectors Mitsubishi Electric UD8400U-W