Mitsubishi Electric FR-E540 Instruction Manual download pdf (Page 65)

OPERATION/CONTROL

Parameter

Number

Name Application

60 Intelligent mode selection

Used to cause the inverter to automatically set the appropriate parameters and

perform operation.

65 Retry selection

Used to select the alarm whose occurrence will cause the inverter to reset and

retry automatically.

Stall prevention operation reduction

starting frequency

Number of retries at alarm

occurrence

Used to set the number of retries to be made when an alarm occurs.

68 Retry waiting time

69 Retry count display erasure

Used to set the number of retries and the waiting time.

71 Applied motor

Used to set the thermal characteristic of the electronic overcurrent protection

according to the motor used.

72 PWM frequency selection Used to change the motor tone.

73 0-5V/0-10V selection

When using the voltage-input signal to perform operation, set the specifications of

the frequency setting signal input to across terminals 2-5.

74 Filter time constant

Used to set the input section built-in filter constant of an external voltage or

current frequency setting signal.

Reset selection/disconnected PU

detection/PU stop selection

Used to choose the reset selection, disconnected PU detection and PU stop

selection functions.

76 Alarm code output selection

Used to output a 4-bit digital signal from the open collector output terminals as the

definition of an alarm that has occurred.

77 Parameter write disable selection

Used to enable or disable the write of various parameters to prevent the

parameters from being rewritten by accidental operation.

78 Reverse rotation prevention selection Used to prevent reverse operation trouble due to the false input of the start signal.

79 Operation mode selection Use to choose the operation mode of the inverter.

160 User group read selection Used to read the values of the basic parameters or all parameters.

180 RL terminal function selection

181 RM terminal function selection

182 RH terminal function selection

183 RT terminal function selection

184 AU terminal function selection

185 JOG terminal function selection

186 CS terminal function selection

Used to choose and assign the functions of the input terminals.

190 RUN terminal function selection

191 SU terminal function selection

192 IPF terminal function selection

193 OL terminal function selection

194 FU terminal function selection

195 A, B, C terminal function selection

Used to choose and assign the functions of the output terminals.

240 Soft-PWM setting Used to change the motor tone.

244 Cooling fan operation selection Used to control the operation of the cooling fan incorporated in the inverter.

900 FM terminal calibration

901 AM terminal calibration

Used to calibrate the meters connected to terminals FM-SD and AM-5.

902 Frequency setting voltage bias

903 Frequency setting voltage gain

904 Frequency setting current bias

905 Frequency setting current gain

Used to set the magnitude (slope) of the output frequency as desired relative to

the frequency setting signal (0 to 5V, 0 to 10V or 4 to 20mA DC).

990 Buzzer control

Used to produce or mute the operational sound generated when you press the

keys of the operation panel and parameter unit.

Simple mode parameter

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 216 217

Comments to this Manuals

No comments

Mitsubishi Electric FR-E540 Instruction Manual Page 65

Comments to this Manuals

Related products and manuals for Power adapters & inverters Mitsubishi Electric FR-E540