Mitsubishi Electric FR-A720-0.4K Specifications Page 46
- Page / 103
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
49
When setting parameters, refer to the instruction manual (applied) and understand instructions.
You can restart the inverter without stopping the motor in the
following cases:
⋅ when commercial power supply operation is switched to inverter
operation
⋅ when power comes back on after an instantaneous power failure
⋅ when motor is coasting at start
* The setting range depends on the inverter capacity. (55K or less/75K or
more)
When
"
0 (initial value) or 10
"
is set in Pr.162, the inverter smoothly
starts after detecting the motor speed upon power restoration.
The motor starts at the motor speed and in the rotation direction
detected from the encoder at power restoration when "2 or 12" is set
in Pr.162 under encoder feedback control or vector control. (Valid
when the FR-A7AP is fitted)
Even when the motor is rotating in the opposite direction, the
inverter can be restarted smoothly as the direction of rotation is
detected. (You can select whether to make rotation direction
detection or not with Pr.299 Rotation direction detection selection at
restarting.)
When Pr.162="1" or "11", automatic restart operation is performed in a
reduced voltage system, where the voltage is gradually risen with the
output frequency unchanged from prior to an instantaneous power
failure independently of the coasting speed of the motor.
For real sensorless vector control, output frequency and voltage
before instantaneous power failure are output. (Pr. 58 is made invalid)
Automatic restart operation after instantaneous
power failure/flying start
Pr.57 Restart coasting time
Pr.58 Restart cushion time
Pr.162
Automatic restart after instantaneous power failure selection
Pr.163 First cushion time for restart Pr.164 First cushion voltage for restart
Pr.165 Stall prevention operation level for restart
Pr.299 Rotation direction detection selection at restarting
Pr.611 Acceleration time at a restart
Pr.
Number
Setting Range Description
57
0
1.5K or less..........0.5s,
2.2K to 7.5K.........1s,
11K to 55K ...........3s
75K or more.........5s
The above times are coasting time.
0.1 to 5s/
0.1 to 30s
*
Set the waiting time for inverter-triggered
restart after an instantaneous power
failure.
9999
(initial value)
No restart
58 0 to 60s
Set a voltage starting time at restart.
162
0 (initial value)
With frequency search
1
Without frequency search (reduced
voltage system)
2
Encoder detection frequency
10
Frequency search at every start
11
Reduced voltage system at every start
12
Encoder detection frequency at every start
163 0 to 20s
Set a voltage starting time at restart.
Consider using these parameters
according to the load (moment of inertia/
torque) magnitude.
164 0 to 100%
165 0 to 220%
Consider the rated inverter current as
100% and set the stall prevention
operation level during restart operation.
299
0
Without rotation direction detection
1
With rotation direction detection
9999
When Pr.78=0, the rotation direction is
detected.
When Pr.78=1,2, the rotation direction is
not detected.
611
0 to 3600s
Set the acceleration time to reach the set
frequency at a restart.
9999
Acceleration time for restart is the normal
acceleration time (e.g. Pr.7).
<Connection diagram>
Pr.
57, 58, 162 to 165, 299, 611
P
r.
STF
IM
MCCB
CS
CS
S1/L21
R1/L11
T/L3
S/L2
R/L1
MC1
MC2
MC3
W
V
U
For use for only
automatic restart
after instantaneous
power failure or flying start,
short CS-SD in advance.
MC
switchover
sequence
SD
SD
V/F control, advanced magnetic flux vector control
Realsensorless vector control, vector control
V/F control, advanced magnetic flux vector control
Realsensorless vector control
Instantaneous (power failure) time
Power supply
(R/L1,S/L2,T/L3)
Motor
speed N (r/min)
Inverter
output frequency
f (Hz)
Inverter
output voltage
E (V)
Coasting
time (Pr.57)
Speed
detection time
+
Acceleration time
at a restart
(Pr. 611 setting)
Restart cushion
time (Pr. 58 setting)
* The output shut off timing differs according
to the load condition.
*
*
Power supply
(R/L1, S/L2,
T/L3)
Motor speed N
(r/min)
Inverter output
frequency f(Hz)
output voltage
E(V)
Instaneous (power failure) time
Coasting
time (Pr.57)
Speed
detection
time
+
Acceleration time
at a restart
(Pr.611 setting)
* The output shut off timing differs
according to the load condition.
Instantaneous (power failure) time
Coasting time
Pr. 57 setting
Restart cushion
time
Pr. 58 setting
Power supply
(R/L1,S/L2,T/L3)
Motor speed N
(r/min)
Inverter
output frequency
f (Hz)
Inverter
output voltage
E (V)
* The output shut off timing differs according
to the load condition.
*
Coasting time
Pr.57 setting
*
Instaneous (power failure) time
Power supply
(R/L1, S/L2,
T/L3)
Motor speed N
(r/min)
Inverter output
frequency f(Hz)
output voltage
E(V)
* The output shut off timing differs
according to the load condition.
- [Highest level of inverter] 2
- 200V class 5
- 400V class 5
- Standard Specifications 6
- Common specifications 7
- Outline Dimension Drawings 8
- Inverter Type H H1 D D1 9
- (Unit: mm) 10
- FR-A720-75K, 90K 11
- FR-A740-110K, 132K 11
- DC reactor supplied 11
- Unit: mm) 11
- FR-A740-315K, 355K 13
- FR-A740-400K, 450K, 500K 14
- Heatsink protrusion procedure 16
- Panel cutting 17
- Inverter Type D1 18
- Terminal Connection Diagram 19
- Terminal 20
- Terminal Name Description 20
- Main circuit 22
- Control circuit 22
- Torque control 23
- Position control 23
- Operation Panel (FR-DU07) 24
- Operation mode switchover 25
- Monitor/frequency setting 25
- Parameter List 26
- Terminal Connection 27
- Terminal Specification 27
- Explanation 27
- , 2 1 0 67 33
- , 9999 1 9999 67 33
- *2 9999 55 36
- 73 38
- 0, 46, 112 39
- 1, 2, 18 39
- 3, 19, 47, 113 39
- 4 to 6, 24 to 27, 232 to 239 39
- 10 to 12, 802, 850 40
- 24 to 27 42
- Output frequency (Hz) 43
- Output frequency 43
- 31 to 36 44
- 37, 144, 505, 811 44
- 41 to 43, 50, 116, 865 44
- 55, 56, 866 45
- 57, 58, 162 to 165, 299, 611 46
- 61 to 64, 292, 293 47
- 65, 67 to 69 48
- Analog input selection 49
- 73, 242, 243, 252, 253, 267 49
- 74, 822, 826, 832, 836, 849 49
- Frequency 50
- Operation mode selection 51
- 100 equals the 53
- Modbus-RTU protocol 54
- 127 to 134, 575 to 577 55
- 135 to 139, 159 55
- 150 to 153, 166, 167 55
- 160, 172 to 174 56
- 178 to 189 57
- 190 to 196 57
- 245 to 247 58
- 251, 872 58
- 255 to 259 58
- ≠ "9999") 59
- 270 to 274, 4, 5 60
- Stop-on contact control 60
- 270, 275, 276, 6 60
- Brake sequence function 61
- 278 to 285, 292 61
- 285, 853 61
- 286 to 288 62
- 291, 384 to 386 62
- 338, 339, 550, 551 62
- 359, 367 to 369 63
- 419, 464 to 494 64
- 419, 428 to 430 64
- 420, 421, 424 64
- 804 to 806 66
- 807 to 809 66
- 818, 819 66
- 840 to 848 68
- 858, 868 68
- 862, 863 69
- 882 to 886, 665 69
- 888, 889 70
- 892 to 899 70
- C0(900), C1(901) 70
- 989, CL, ALLC, Er.CL, PCPY 71
- Protective Functions 72
- Major failures 73
- Option and Peripheral Devices 74
- Stand-alone Shared 75
- Stand-alone Option 76
- Less than D 76
- Braking torque 78
- Brake unit selection table 79
- Inverter 80
- Brake unit 80
- Recommended cable size 82
- Cable Clamp MS3057-12A 83
- MCCB INV 84
- × (Ig1+Ign+lgi+Ig2+Igm) 85
- ≥ Ig × 10) 85
- Safety Precautions 86
- 0.4K 0.75K 88
- 1.5K or 88
- Leakage currents 89
- Application to Motor 90
- Output torque 91
- Motor type 92
- Dedicated motor model lineup 92
- Motor specification 93
- Dimensions table (Unit: mm) 94
- (1500r/min series) 94
- Section BB 96
- Section B 97
- (1500r/min series) 99
- Item FR-A500(L) FR-A700 101
- Warranty 102
- International FA center 103
Related products and manuals for Power adapters & inverters Mitsubishi Electric FR-A720-0.4K
(58 pages)© 2020, manymanuals.com. All rights reserved. | 0.125 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals