Mitsubishi Electric UD8400U-W User Manual download pdf (Page 25)

EN-25

Viewing computer images (continued)

Setting the aspect ratio

You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the

setting according to the type of the screen to be used or your preference.

How to change the settings:

With the remote control:

1. Press the ASPECT button.

• Every time the ASPECT button is pressed, the aspect mode changes from NORMAL (FULL) to NORMAL (16:9),

to NORMAL (4:3), to 16:9, to REAL, to FULL, and back to NORMAL (FULL).

• The following table shows the image display patterns depending on the settings.

UXGA signal

1600 x 1200

(4:3)

WUXGA signal

1920 x 1200

(16:10)

1080p signal

1920 x 1080

(16:9)

16:10

NORMAL (FULL)

Input signal

Setting

NORMAL (16:9) NORMAL (4:3) 16:9

REAL FULL

Input video signal is

displayed at the max

height (1200 pixels) or

max width (1920

pixels) of the panel

while its aspect ratio

is maintained.

Select this setting

when using a 16:9

screen.

Select this setting

when using a 4:3

screen.

Regardless of the type

of input signal, image

is displayed at 16:9

aspect ratio (1920 x

1080 pixels). Select to

expand squeezed (or

horizontally

compressed) images

such as DVD images

to 16:9.

Input video signal is

displayed at its

original pixel size.

(When the pixel size is

larger than the panel

size, only the center

part of the image is

displayed.)

Regardless of the type

of input signal, image

is displayed at the full

panel size (1920 x

1200 pixels).

4:3

1600 x 1200

16:9

1920 x 1080

16:10

1440 x 1080

1728 x 1080

16:9

1920 x 1080

4:3 4:3

1600 x 1200

16:9

1600 x 900

16:9 16:9

1920 x 1080

16:10

16:9

1920 x 1080

16:9

1920 x 1080

16:10

1920 x 1200

16:10

1920 x 1200

4:3

1600 x 1200

16:10

1920 x 1200 1600 x 1000 1920 x 1080 1920 x 1200 1920 x 1200

With the FEATURE menu:

(See page 32 for menu setting.)

1. Display the FEATURE menu.

2. Select ASPECT by pressing the S or T button.

3. Select your desired aspect ratio by pressing the W or X button.

When 16:9

is selected with the FEATURE menu, you can select whether

or not to display signals at 16:9 depending on their type using the following

procedures.

4. Press the ENTER button.

5. Select a setting for the item MODE by pressing the W or X button.

• ALL SIGNALS:

All signals are always displayed at 16:9 irrespective of their type.

• VIDEO ONLY:

Signals supplied from video devices only are displayed at 16:9.

To cancel the menu:

6. Press the MENU button.

Important:

• If you change the aspect ratio to 16:9, REAL, or FULL while displaying images on a 4:3 screen with the aspect

ratio set to NORMAL (4:3), images appear partly off screen.

• In such cases as when you keep displaying images in the 4:3 mode for a long time and then change the mode to

FULL, the masking areas may remain as afterimage around the displayed image. Consult your dealer in this case.

• When the input video signal is interrupted with NORMAL (16:9) or NORMAL (4:3) selected, the image turns blue

and appears partly off screen. In this case, set BACK COLOR in the INSTALLATION 2 menu to BLACK.

FEATURE

ASPECT

PROJECTOR ID

NORMAL (FULL)

ALL

FEATURE

ASPECT – 16:9

1 2

opt.

MODE

ALL SIGNALS

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 75 76

Comments to this Manuals

No comments

Mitsubishi Electric UD8400U-W User Manual Page 25

Comments to this Manuals

Related products and manuals for Data projectors Mitsubishi Electric UD8400U-W