Mitsubishi Electric PC36 Instruction Manual download pdf (Page 21)

3. PARAMETERS

3 - 6

3.4.2 Detail description

POINT

The parameter names of [Pr. PD25] is not displayed with the following versions

of MR Configurator/MR Configurator2. However, this setting value is

changeable. Follow the instructions in this Instruction Manual to set a value.

MRZJW3-SETUP221E: software version C3 or below

SW1DNC-MRC2-E: software version 1.09K or below

No. Symbol Name and function

Initial

value

Setting

range

Unit

PD25 A8DT [AL. 8D CC-Link IE communication error] detection time

Selecting the [AL. 8D] detection time in [Pr. PC50] activates the time setting of

[AL. 8D].

It is 10 ms when [Pr. PC50] = "0".

Convert a decimal value to a hexadecimal value for input.

The setting range is up to 1000 ms. A set value is limited within the setting

range.

For example) If "03E8h" is set, the set value becomes 1000 ms.

The converted decimal value of "1388h" is 10000 ms, but it is

limited to 1000 ms, which is the upper limit of the setting range.

0000h 0000h

03E8h

CAUTION

If [AL. 8D CC-Link IE

communication error] does not

have to be detected, use the

communication time-out setting in

the initial setting. When you

change the setting value, do not

set an unnecessarily long time

period. Doing so interferes swift

stop operation at an occurrence of

[AL. 8D CC-Link IE

communication error].

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 49 50

No comments

Mitsubishi Electric PC36 Instruction Manual Page 21