Mitsubishi Electric PC36 Instruction Manual download pdf (Page 23)

3. PARAMETERS

3 - 8

3.5.2 Detail description

POINT

The parameter names of [Pr. Po34] and [Pr. Po35] are not displayed with the

following versions of MR Configurator/MR Configurator2. However, their setting

values are changeable. Follow the instructions in this Instruction Manual to set a

value.

MRZJW3-SETUP221E: software version C3 or below

SW1DNC-MRC2-E: software version 1.09K or below

No. Symbol Name and function

Initial

value

Setting

range

Unit

Po34 *STNO CC-Link IE communication station number selection

Use this parameter to set the station number of the servo amplifier.

Convert a decimal value to a hexadecimal value for input.

If you are using an automatic station number, which is designated by the

master station, do not change the initial value "0000h".

If you are designating a station number, set a value in the range of 1 to 120

(0001h to 0078h). A value higher the maximum value will trigger [AL. 37

parameter error].

For example) The setting value "0078h" sets the station number of 120.

The setting value "0079h" or a higher will trigger [AL. 37

parameter error].

0000h 0000h

0078h

Po35 *NWNO CC-Link IE communication network number

Use this parameter to set the network number of the servo amplifier.

Convert a decimal value to a hexadecimal value for input.

The network number is 1 at the initial value of "0000h".

The maximum setting value for the network number is 239.

A value higher than the maximum value will trigger [AL. 37 parameter error].

For example) The setting value "00EFh" sets the station number of 239.

The setting value "012Ch" will trigger [AL. 37 parameter error].

If an automatic number has been selected with [Pr. Po34] and the rotary

switch on the MR-J3-_T, this parameter setting is ignored. Instead, the

network number transmitted from the master station is used.

0000h 0000h

00EFh

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 49 50

No comments

Mitsubishi Electric PC36 Instruction Manual Page 23