Mitsubishi Electric UD8400U-W User Manual download pdf (Page 16)

EN-16

Setting up your projector (continued)

Adjustment using the CURVED mode

To adjust images projected on a curved surface, press

the ENTER/GEOMETRY button on the projector or the

GEOMETRY button on the remote control to display

the CURVED mode, and then press the S, T, W or X

button to correct the distortion.

CURVED

ARC

SELECT : BLANK

: 0

Every time you press the BLANK button, the

adjustment menu changes as follows:

ARC



HORIZ. ORIGIN



VERT. ORIGIN



RESET



ARC...

ARC menu

You can correct the arc vertically or horizontally

focusing on the screen center.

Press the

button.

Press the

button.

Press the

button.

Press the

button.

HORIZ. ORIGIN or VERT. ORIGIN menu

When the CURVED-mode adjustment has excessive

effect on either top or bottom or either right or left side

of the screen, adjust the horizontal or vertical position

of the origin to the horizontal or vertical arc. Without

the arc adjustment, the image shape won’t change.

Adjusting the origin to the horizontal arc

• When the horizontal arc adjustment is negative (-)

(or the ARC is adjusted in the T direction)

Press the

button.

Press the

button.

Press the

button.

Press the

button.

• When the horizontal arc adjustment is positive (+)

(or the ARC is adjusted in the S direction)

Press the

button.

Press the

button.

Press the

button.

Press the

button.

Adjusting the origin to the vertical arc

• When the vertical arc adjustment is negative (-) (or

the ARC is adjusted in the W direction)

Press the

button.

Press the

button.

Press the

button.

Press the

button.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 75 76

Comments to this Manuals

No comments

Mitsubishi Electric UD8400U-W User Manual Page 16

Comments to this Manuals

Related products and manuals for Data projectors Mitsubishi Electric UD8400U-W