Mitsubishi Electric UD8400U-W User Manual download pdf (Page 38)

EN-38

ITEM SETTING FUNCTION

SCART INPUT ON / OFF Choose ON when connecting the projector with a device equipped

with the SCART terminal that can output RGB signal. SCART

terminal is used mainly in Europe. Choose OFF normally. (Available

only for the input signal from the COMPUTER/COMPONENT VIDEO

IN-1 terminal.)

LAMP WARNING

STANDARD

When the lamp operating time exceeds 3000 hours with LAMP

MODE set to LOW, a warning dialog is displayed.

SHORT TERM

When the lamp operating time exceeds 3800 hours with LAMP

MODE set to LOW, a warning dialog is displayed.

HIDE OSD

OFF

Select this option for normal use.

The no-signal dialog, input dialog, SCART warning dialog, auto

power-off dialog, lamp warning dialog, and abnormal temperature

dialog aren’t displayed.

LAMP 1 TIME RESET OK

The LAMP 1 operation time is reset to 0.

LAMP 2 TIME RESET OK

The LAMP 2 operation time is reset to 0.

FILTER TIME RESET OK The ﬁ lter operation time and the cleaning count is reset to 0.

RESET ALL OK The menu settings are reset to the factory defaults (except the

LANGUAGE, PASSWORD FUNCTION, IMAGE CAPTURE, and

NETWORK settings).

• CINEMA MODE can be adjusted only when a TV60, TV50, 480i, 576i or 1080i signal is being displayed.

• When SCART INPUT is set to ON, normal computer signals aren’t projected.

• Use a commercially available SCART-Mini D-SUB 15-pin cable when connecting this projector with an AV device equipped

with the SCART terminal.

• Some AV devices equipped with the SCART terminal aren’t compatible with this projector.

• The RESET ALL process may take some time to complete.

• You cannot carry out RESET ALL for approx. 2 minutes after the lamp switching or the lamp relay operation.

FEATURE menu (continued)

Menu operation (continued)

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 75 76

No comments

Mitsubishi Electric UD8400U-W User Manual Page 38