Mitsubishi Electric F700 Instruction Manual download pdf (Page 117)

112

Extended parameters

Appendix 2-1 Used to display the extended parameters.

Appendix 2 Extended parameters

Error display?

If the operation panel does not have the write precedence

REMARKS

If the setting has not been changed, the value does not flicker and the next parameter number appears.

Pr. 160 Description

9999

(Initial Value)

Only the simple mode parameters can be displayed.

0 Simple mode and extended mode parameters can be displayed.

1 Only the parameters registered in the user group can be displayed.

1. Screen at powering on

The monitor display appears.

DisplayOperation

3. Press to choose the parameter

setting mode.

4. Tu

rn until (

Pr. 160)

appears.

Flicker ··· Parameter setting complete!!

7. Press to set.

PU indication is lit.

2. Press to choose

the PU operation mode.

· Press twice to show the next parameter.

· By turning , you can read another parameter.

· Press to show the setting again.

The parameter

number read

previously appears.

After parameter setting is completed, press once to show the alarm history and

press twice to return to the monitor display. To change settings of other parameters,

perform the operation in above steps 3 to 7.

5. Press to read the currently set value.

" " (initial value) appears.

6. Turn to change it to the set value

of " ".

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 142 143

No comments

Mitsubishi Electric F700 Instruction Manual Page 117