Mitsubishi Electric F700 Instruction Manual Page 118
- Page / 143
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
113
Extended parameters
Extended parameter list
Appendix 2-2 Extended parameter list
indicates simple mode parameters.
Func
t
ion
Parameter
Name
Incre
ments
Initial
Value
Range Description
Param
eter
copy
Param
eter
clear
All
param
eter
clear
Related
parameters
: enabled
× : disabled
Manual torque boost
0
Torque boost
0.1%
6/4/3/2/
1.5/1%
*1
0 to 30%
Set the output voltage at 0Hz as %.
*1 Initial values differ according to the
inverter capacity. (0.75K
/ 1.5K to 3.7K /
5.5K, 7.5K
/ 11K to 37K / 45K, 55K /
75K or more)
46
Second torque
boost
0.1% 9999
0 to 30%
Set the torque boost when the RT signal
is on.
9999 Without second torque boost
Maximum/minimum
frequency
1
Maximum
frequency
0.01Hz
120/
60Hz
*2
0 to 120Hz
Set the upper limit of the output frequency.
*2 The setting depends on the inverter
capacity (55K or less/75k or more)
2
Minimum frequency
0.01Hz 0Hz 0 to 120Hz Set the lower limit of the output frequency.
18
High speed
maximum
frequency
0.01Hz
120/
60Hz
*3
120 to 400Hz
Set when performing the operation at
120Hz or more.
*3 The setting depends on the inverter
capacity (55K or less/75k or more)
Base frequency, voltage
3
Base frequency
0.01Hz 60Hz 0 to 400Hz
Set the frequency when the motor rated
torque is generated. (50Hz/60Hz)
19
Base frequency
voltage
0.1V 9999
0 to 1000V
Set the base voltage.
8888
95% of power supply voltage
9999
Same as power supply voltage
47
Second V/F (base
frequency)
0.01Hz 9999
0 to 400Hz
Set the base frequency when the RT
signal is on.
9999 Second V/F is invalid
Multi-speed setting operation
4
Multi-speed setting
(high speed)
0.01Hz 60Hz 0 to 400Hz Set frequency when the RT signal is on.
5
Multi-speed setting
(middle speed)
0.01Hz 30Hz 0 to 400Hz
Set frequency when the RM signal is on.
6
Multi-speed setting
(low speed)
0.01Hz 10Hz 0 to 400Hz
Set frequency when the RL signal is on.
24
27
Multi-speed
setting(4 speed to 7
speed)
0.01Hz 9999
0 to 400Hz,
9999
Frequency from 4 speed to 15 speed can
be set according to the combination of the
RH, RM, RL and REX signals.
9999: not selected
232
239
Multi-speed
setting(8 speed to
15 speed)
0.01Hz 9999
0 to 400Hz,
9999
to
to
- INSTRUCTION MANUAL (BASIC) 1
- INVERTER 1
- 4. Additional Instructions 2
- Environment 2
- , surge suppressor or radio 2
- 2 INSTALLATION AND WIRING 2 3
- 3 DRIVE THE MOTOR 28 3
- 4 ADJUSTMENT 51 4
- 5 TROUBLESHOOTING 62 4
- 7 SPECIFICATIONS 91 5
- APPENDICES 110 5
- FR --F740 6
- 2 INSTALLATION AND WIRING 7
- 2.1 Peripheral devices 8
- Peripheral devices 9
- INSTALLATION AND WIRING 10
- •Reinstallation 11
- 2.4 Wiring 13
- 200V class 14
- Screw size 17
- Cable Sizes 19
- (3) Total wiring length 21
- (2) Output signals 23
- (separate power) 25
- (7) Control logic switchover 27
- 2.4.7 RS-485 terminal block 30
- 2.4.8 Communication operation 30
- 3.1 Step of operation 33
- 3.2 Operation panel (FR-DU07) 34
- Operation panel (FR-DU07) 35
- DRIVE THE MOTOR 36
- Operation 37
- 3 Base frequency 39
- (PU operation mode) 40
- Flickering 42
- Operation Display 43
- DisplayOperation 45
- 11. Stop 45
- (external operation) 48
- Three-phase 50
- AC power supply 50
- 10. Stop 51
- 7. Mode/monitor check 51
- 4 ADJUSTMENT 56
- CAUTION 58
- (Pr.7, Pr.8) 59
- ADJUSTMENT 60
- 4.7 Parameter clear 63
- 4.8 All parameter clear 64
- 4.9 Parameter copy 65
- 4.10 Parameter verification 66
- 5.1 List of alarm display 67
- Causes and corrective actions 68
- TROUBLESHOOTING 68
- Inverter 79
- (2) Clearing procedure 81
- 6.1 Inspection Item 84
- Inspection Item 85
- 6.1.6 Cleaning 88
- 6.1.7 Replacement of parts 89
- 6.1.8 Inverter replacement 93
- Earth (ground) terminal 94
- Measuring 95
- 7.1 Rating 96
- •400V class 97
- 7.2 Common specifications 98
- Common specifications 99
- Outline dimension drawings 100
- SPECIFICATIONS 100
- • DC reactor supplied 106
- • FR-F740-250K, 280K, 315K 106
- • FR-F740-400K 108
- • FR-F740-450K 109
- • FR-F740-500K, 560K 110
- • FR-PU04 111
- • FR-F740-185K to 315K 113
- • FR-F740-355K or more 113
- APPENDICES 115
- Extended parameters 117
- Extended parameter list 118
- (2) Wiring instructions 139
- Instructions for installation 140
- (1) EMC Directive 142
- (2) Low Voltage Directive 142
- Print Date 143
- Manual Number 143
- Revision 143
Related products and manuals for Power adapters & inverters Mitsubishi Electric F700
(59 pages)© 2020, manymanuals.com. All rights reserved. | 0.322 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals