Mitsubishi Electric F700 Instruction Manual download pdf (Page 49)

Operation by the start command of the

terminal block (external operation)

REMARKS

· Pr. 178 STF terminal function selection must be set to "60" (or Pr. 179 STR terminal function selection must be set to "61").

(all are initial values)

· When Pr. 79 Operation mode selection is set to "3", multi-speed operation (refer to page 45) is also made valid.

When the inverter is stopped by of the operation panel (FR-DU07), and

are displayed alternately.

1. Turn the start switch (STF or STR) off.

2. The display can be reset by .

Display

Operation

Stop

10.Turn the start switch (STF or STR) off.

The motor decelerates according to

Pr. 8 Deceleration time to stop.

OFF

Flicker ··· Frequency setting complete!!

9.While the value is flickering,

press to set the frequency.

If you do not press ,the value flickers

for about 5s and the display then returns

to 0.00 (display) Hz. At this time, return to

"Step 3" and set the frequency again.

Forward

rotation

Reverse

rotation

Flickering

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 142 143

No comments

Mitsubishi Electric F700 Instruction Manual Page 49