Mitsubishi Electric F700 Instruction Manual download pdf (Page 64)

All parameter clear

ADJUSTMENT

4.8 All parameter clear

POINT

·Set "1" in ALLC parameter clear to initialize all parameters. (Parameters are not cleared when "1" is set in Pr. 77

Parameter write selection. In addition, calibration parameters are not cleared.)

· Refer to the extended parameter list on page 113 for parameters to be cleared with this function.

and are displayed alternately ... Why?

The inverter is not in the PU operation mode.

1. Press .

is lit and the monitor (4 digit LED) displays "0" (Pr.79 = "0" (initial value)).

2. Carry out operation from step 6 again.

Screen at powering on

The monitor display appears.

Display

Operation

Press to choose the parameter

setting mode.

Flicker ··· Parameter setting complete!!

Press to set.

Press to read the currently set

value.

" "(initial value) appears.

PU indication is lit.

Press to choose the PU operation

mode.

· Press to read another parameter.

· Press twice to show the next parameter.

· Press to show the setting again.

Turn until (all parameter

clear) appears.

Turn clockwise to change it to

the setting value of " ".

The parameter

number read

previously appears.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 142 143

No comments

Mitsubishi Electric F700 Instruction Manual Page 64