Mitsubishi Electric F700 Instruction Manual download pdf (Page 36)

Operation panel (FR-DU07)

DRIVE THE MOTOR

3.2.3 Operation lock (Press [MODE] for an extended time (2s))

· Set "10 or 11" in Pr. 161, then press for 2s to make the setting dial and key operation invalid.

· When the setting dial and key operation is made invalid, appears on the operation panel.

When the setting dial and key operation is invalid, appears if the setting dial or key operation is

performed. (When the setting dial or key operation is not performed for 2s, the monitor display appears.)

· To make the setting dial and key operation valid again, press for 2s.

Operation using the setting dial and key of the operation panel can be made invalid to prevent parameter

change and unexpected start and stop.

POINT

Set "0" (extended mode parameter valid) in Pr.160 User group read selection.

Set "10 or 11" (key lock mode valid) in Pr.161 Frequency setting/key lock operation selection.

Functions valid even in the operation lock status

Stop and reset with .

1.Screen at powering on

The monitor display appears.

Display

Operation

Flicker ··· Parameter setting complete!!

PU indication is lit.

2.Press to choose the PU

operation mode.

9.Press for 2s to show the key lock mode.

Press for 2s.

3.Press to choose the parameter

setting mode.

Flicker ··· Parameter setting complete!!

7.Press to set.

5.Press to read the currently set value.

" "(initial value) appears.

Turn until (

Pr. 160) appears.

6.Turn counterclockwise to change

it to the setting value of " ".

8.Change Pr. 161 to the setting value of " "

in the similar manner.

(Refer to step 4 to 7.)

The parameter

number read

previously

appears.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 142 143

No comments

Mitsubishi Electric F700 Instruction Manual Page 36