Mitsubishi Electric F700 Instruction Manual download pdf (Page 29)

Wiring

2.4.5 When connecting the operation panel using a connection cable

When connecting the operation panel (FR-DU07) to the inverter using a cable, the operation panel can be

mounted on the enclosure surface and operationality improves.

2.4.6 Connector with/without EMC filter

Change the connector from OFF to ON to make the EMC filter valid. (In the initial setting status, the connector is

fitted to OFF.)

(If it is difficult to disconnect the connector, use a pair of long-nose pliers, etc.)

The FR-F720-0.75K and 1.5K are not provided with the ON/OFF connector of the EMC filter.

CAUTION

Do not connect the PU connector to the computer's LAN port, FAX modem socket or telephone connector.

The inverter and machine could be damaged due to differences in electrical specifications.

REMARKS

⋅ Refer to page 5 for removal method of the operation panel.

⋅ When using a commercially available connector and cable as a parameter unit connection cable, refer to the Instruction Manual

(applied).

⋅ The inverter can be connected to the computer and FR-PU04.

CAUTION

Leakage current will increase when the EMC filter is selected.

For details of noise and leakage current, refer to the Instruction Manual (applied).

Parameter unit connection cable

(FR-CB2)(option)

Operation panel(FR-DU07)

Operation panel connection connector

(FR-ADP)(option)

EMC filter OFF EMC filter OFF EMC filter OFFEMC filter ON EMC filter ON EMC filter ON

VUW

15K or more0.75K to 5.5K 7.5K, 11K

(initial setting) (initial setting) (initial setting)

FR-F720-2.2K to 5.5K

FR-F740-0.75K to 5.5K

FR-F720-7.5K, 11K

FR-F740-7.5K, 11K

FR-F720-15K

FR-F740-15K, 18.5K

FR-F720-18.5K to 30K

FR-F740-22K, 30K

FR-F720-37K or more

FR-F740-37K or more

EMC filte

ON/OFF

connecto

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 142 143

No comments

Mitsubishi Electric F700 Instruction Manual Page 29