Mitsubishi Electric F700 Instruction Manual Page 123
- Page / 143
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
118
Extended parameters
Extended parameter list
Restart operation
after instantaneous
power failure
57
Restart coasting
time
0.1s 9999
0
The coasting time is as follows:
1.5K or less................................... 0.5s,
2.2K to 7.5K .................................. 1.0s,
11K to 55K .................................... 3.0s,
75K or more .................................. 5.0s
0.1 to 5s/
0.1 to 30s
*10
Set the waiting time for inverter-triggered
restart after an instantaneous power failure.
*10 The setting depends on the inverter
capacity (55K or less/75k or more)
9999 No restart
58
Restart cushion
time
0.1s 1s 0 to 60s Set a voltage starting time at restart.
162
Automatic restart
after instantaneous
power failure
selection
10
0 With frequency search
1
Without frequency search (Reduced
voltage method)
10 Frequency search at every start
11 Reduced voltage method at every start
163
First cushion time
for restart
0.1s 0s 0 to 20s
Set a voltage starting time at restart.
Consider according to the magnitude of
load (inertia moment/torque).
164
First cushion
voltage for restart
0.1% 0% 0 to 100%
165
Stall prevention
operation level for
restart
0.1% 120% 0 to 150%
Consider the rated inverter current as
100% and set the stall prevention
operation level during restart operation.
299
Rotation direction
detection selection
at restarting
1 9999
0 without rotation direction detection
1 with rotation direction detection
9999
When Pr. 78="0", the rotation direction is
detected.
When Pr. 78="1","2", the rotation direction
is not detected.
611
Acceleration time at
a restart
0.1s 5/15s *11
0 to 3600s
Set the acceleration
time to reach the set
frequency at a
restart.
*11 The setting
depends on the
inverter capacity
(55K or less/75k
or more)
9999
Acceleration time for
restart is the normal
acceleration time
(e.g. Pr. 7).
Remote setting function
59
Remote function
selection
10
0
RH, RM, RL signal
function
Frequency setting
storage function
Multi-speed setting
1 Remote setting Yes
2 Remote setting No
3 Remote setting
No (Turning STF/
STR off clears
remotely-set
frequency.)
Energy saving
control selection
60
Energy saving
control selection
10
0 Normal operation mode
4 Energy saving operation mode
9 Optimum excitation control mode
Func
t
ion
Parameter
Name
Incre
ments
Initial
Value
Range Description
Param
eter
copy
Param
eter
clear
All
param
eter
clear
Related
parameters
: enabled
× : disabled
- INSTRUCTION MANUAL (BASIC) 1
- INVERTER 1
- 4. Additional Instructions 2
- Environment 2
- , surge suppressor or radio 2
- 2 INSTALLATION AND WIRING 2 3
- 3 DRIVE THE MOTOR 28 3
- 4 ADJUSTMENT 51 4
- 5 TROUBLESHOOTING 62 4
- 7 SPECIFICATIONS 91 5
- APPENDICES 110 5
- FR --F740 6
- 2 INSTALLATION AND WIRING 7
- 2.1 Peripheral devices 8
- Peripheral devices 9
- INSTALLATION AND WIRING 10
- •Reinstallation 11
- 2.4 Wiring 13
- 200V class 14
- Screw size 17
- Cable Sizes 19
- (3) Total wiring length 21
- (2) Output signals 23
- (separate power) 25
- (7) Control logic switchover 27
- 2.4.7 RS-485 terminal block 30
- 2.4.8 Communication operation 30
- 3.1 Step of operation 33
- 3.2 Operation panel (FR-DU07) 34
- Operation panel (FR-DU07) 35
- DRIVE THE MOTOR 36
- Operation 37
- 3 Base frequency 39
- (PU operation mode) 40
- Flickering 42
- Operation Display 43
- DisplayOperation 45
- 11. Stop 45
- (external operation) 48
- Three-phase 50
- AC power supply 50
- 10. Stop 51
- 7. Mode/monitor check 51
- 4 ADJUSTMENT 56
- CAUTION 58
- (Pr.7, Pr.8) 59
- ADJUSTMENT 60
- 4.7 Parameter clear 63
- 4.8 All parameter clear 64
- 4.9 Parameter copy 65
- 4.10 Parameter verification 66
- 5.1 List of alarm display 67
- Causes and corrective actions 68
- TROUBLESHOOTING 68
- Inverter 79
- (2) Clearing procedure 81
- 6.1 Inspection Item 84
- Inspection Item 85
- 6.1.6 Cleaning 88
- 6.1.7 Replacement of parts 89
- 6.1.8 Inverter replacement 93
- Earth (ground) terminal 94
- Measuring 95
- 7.1 Rating 96
- •400V class 97
- 7.2 Common specifications 98
- Common specifications 99
- Outline dimension drawings 100
- SPECIFICATIONS 100
- • DC reactor supplied 106
- • FR-F740-250K, 280K, 315K 106
- • FR-F740-400K 108
- • FR-F740-450K 109
- • FR-F740-500K, 560K 110
- • FR-PU04 111
- • FR-F740-185K to 315K 113
- • FR-F740-355K or more 113
- APPENDICES 115
- Extended parameters 117
- Extended parameter list 118
- (2) Wiring instructions 139
- Instructions for installation 140
- (1) EMC Directive 142
- (2) Low Voltage Directive 142
- Print Date 143
- Manual Number 143
- Revision 143
Related products and manuals for Power adapters & inverters Mitsubishi Electric F700
(59 pages)© 2020, manymanuals.com. All rights reserved. | 0.276 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals