Mitsubishi Electric Q172CPU User Manual download pdf (Page 113)

2 - 94

2 SYSTEM CONFIGURATION

(5) Setting of the axis No. and axis select switch of servo amplifier

Axis No. is used to set the axis numbers of servo amplifiers connected to

SSCNET

connector(CN ) in the program.

Axis No. of 1 to 32 can be set for Q173CPU(N), and axis No. of 1 to 8 can be set

for Q172CPU(N).

Axis No. is set for each system of SSCNET in the system setting of programming

software. Axis No. (Q173CPU(N):1 to 32/Q172CPU(N):1 to 8) is allocated and

set for the setting axis number (d01 to d8) of servo amplifier.

Since the axis number (d01 to d8) of servo amplifier on the system setting screen

corresponds to axis select switch (0 to 7) of servo amplifier, set the axis select

switch referring to the table of next page.

• System setting (Allocation of axis No.)

•

Axis select switch (Servo amplifier)

Set the axis No. relative to axis number (dno.).

(Note) : Correspondence between dno. and axis select switch of servo amplifiers is shown in the next

page.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 233 234

No comments

Mitsubishi Electric Q172CPU User Manual Page 113