2 - 53
2 SYSTEM CONFIGURATION
(c) Serial absolute synchronous encoder input
Item Specifications
Applicable signal types Differential-output type : (SN75C1168 or equivalent)
Transmission method Serial communications
Synchronous method Counter-clock-wise (viewed from end of shaft)
Communication speed 2.5Mbps
Applicable types MR-HENC
Position detection method Absolute(ABS) method
Resolution 16384PLS/rev(14bit)
Number of modules 2/module
External connector type 20 pin connector
Applicable connector for
the external connection
MR-J2CNS(Optional)
Applicable wire UL20276 AWG#22 6Pair
Connecting cable
MR-JHSCBL
M-H
(
=cable length 2m(6.56ft.), 5m(16.40ft.), 10m(32.81ft.), 20m(65.62ft.),
30m(98.43ft.) )
(Note)
Cable length Up to 30m (98.43ft.)
Back up the absolute position. Depends on A6BAT/MR-BAT.
15000[ h ], (Example of encoders 2, Ambient temperature 40°C (104°F) )
Battery service life time(value in actual)
30000[ h ], (Example of encoders
1
, Ambient temperature 40°C (104°F) )
(Note) : You can use these cables when the tracking enable signal is not used.
When the tracking enable signal is used, fabricate the cable on the customer side.
Comments to this Manuals